Increasing confidence will free up funds for investments in skills and manufacturing sites
UK-based car manufacturers are keen to source an extra £3bn worth of parts from British suppliers over the next few years. But the question of how quickly a localised supply base can be built could potentially put the brakes on potential investment plans.
The UK currently has a chronically underdeveloped supply base compared with its European counterparts. Currently, around 30% of the parts in a typical UK-built car are sourced from UK suppliers. In Germany it’s closer to 60%. Longer-term targets include adding 15,000 jobs in the next three years – twice the addition in the past three years – and ramping up new investment projects by 20% to more than 180.
The issue comes at a time where the United Kingdom is bucking the trend of low European growth with its own burgeoning production sites for Jaguar-Land Rover, Nissan, Toyota and Ford. IHS Automotive forecasts the UK production will reach 1.53m vehicles in 2013, compared with just over a million in 2009.
However the localised supply base in the region is still underdeveloped thanks to small and medium enterprises being unable to gain credit for basic but expensive items like tooling. Even for larger suppliers, these structurally related costs needed to increase production push down operating profit, increasing risk. The considerable fluctuations mean that if revenues fail to meet expectations in periods of high investment, tight margins for profitability could turn into losses.
The British government is eager to capitalise on the growth in the automotive sector, especially when set against the backdrop of a withering European market. This year has already seen a deal for a £1bn investment for a centre to promote engine research. Britain’s automotive industry has benefited from close state attention in recent years, part of a strategy to promote manufacturing and wean the economy off a reliance on financial services.
However there are obstacles. Automotive suppliers in Britain have suffered through a lack of financial support that rivals countries like Germany enjoy, and an acute skills shortage is cited by many as a growth constraint.
But while funding is starting to flow back as confidence returns, the issue of a skills gap in the UK takes longer to solve. Bentley chief executive, Dr Wolfgang Schreiber, said that the government's efforts to boost the “simple supply chain” manufacturing and engineering would help the whole economy. Speaking in the Daily Telegraph, he said “We need to focus on these less sophisticated areas, like making basic metal parts, sealants, rubber parts. It may sound too simple but it’s a critical issue.” He added: “The supply chain here in the UK is not robust enough for the future. We definitely need to work on it.”
He called for specialist colleges to train workers in areas such as “mechantronics”, the mix of engineering and electronics. “So many parts have wires attached now, chassis parts, powertrain parts, electric parts – and they are not really available here in the UK,” he said.
“We need to build that know-how here. It would be best to build dedicated colleges focusing on this. It would take time but it would be money well spent and it would create a sustainable supply chain.”
Copyright © 2025 S&P Global Inc. All rights reserved.
These materials, including any software, data, processing technology, index data, ratings, credit-related analysis, research, model, software or other application or output described herein, or any part thereof (collectively the “Property”) constitute the proprietary and confidential information of S&P Global Inc its affiliates (each and together “S&P Global”) and/or its third party provider licensors. S&P Global on behalf of itself and its third-party licensors reserves all rights in and to the Property. These materials have been prepared solely for information purposes based upon information generally available to the public and from sources believed to be reliable.
Any copying, reproduction, reverse-engineering, modification, distribution, transmission or disclosure of the Property, in any form or by any means, is strictly prohibited without the prior written consent of S&P Global. The Property shall not be used for any unauthorized or unlawful purposes. S&P Global’s opinions, statements, estimates, projections, quotes and credit-related and other analyses are statements of opinion as of the date they are expressed and not statements of fact or recommendations to purchase, hold, or sell any securities or to make any investment decisions, and do not address the suitability of any security, and there is no obligation on S&P Global to update the foregoing or any other element of the Property. S&P Global may provide index data. Direct investment in an index is not possible. Exposure to an asset class represented by an index is available through investable instruments based on that index. The Property and its composition and content are subject to change without notice.
THE PROPERTY IS PROVIDED ON AN “AS IS” BASIS. NEITHER S&P GLOBAL NOR ANY THIRD PARTY PROVIDERS (TOGETHER, “S&P GLOBAL PARTIES”) MAKE ANY WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, FREEDOM FROM BUGS, SOFTWARE ERRORS OR DEFECTS, THAT THE PROPERTY’S FUNCTIONING WILL BE UNINTERRUPTED OR THAT THE PROPERTY WILL OPERATE IN ANY SOFTWARE OR HARDWARE CONFIGURATION, NOR ANY WARRANTIES, EXPRESS OR IMPLIED, AS TO ITS ACCURACY, AVAILABILITY, COMPLETENESS OR TIMELINESS, OR TO THE RESULTS TO BE OBTAINED FROM THE USE OF THE PROPERTY. S&P GLOBAL PARTIES SHALL NOT IN ANY WAY BE LIABLE TO ANY RECIPIENT FOR ANY INACCURACIES, ERRORS OR OMISSIONS REGARDLESS OF THE CAUSE. Without limiting the foregoing, S&P Global Parties shall have no liability whatsoever to any recipient, whether in contract, in tort (including negligence), under warranty, under statute or otherwise, in respect of any loss or damage suffered by any recipient as a result of or in connection with the Property, or any course of action determined, by it or any third party, whether or not based on or relating to the Property. In no event shall S&P Global be liable to any party for any direct, indirect, incidental, exemplary, compensatory, punitive, special or consequential damages, costs, expenses, legal fees or losses (including without limitation lost income or lost profits and opportunity costs or losses caused by negligence) in connection with any use of the Property even if advised of the possibility of such damages. The Property should not be relied on and is not a substitute for the skill, judgment and experience of the user, its management, employees, advisors and/or clients when making investment and other business decisions.
The S&P Global logo is a registered trademark of S&P Global, and the trademarks of S&P Global used within this document or materials are protected by international laws. Any other names may be trademarks of their respective owners.
The inclusion of a link to an external website by S&P Global should not be understood to be an endorsement of that website or the website's owners (or their products/services). S&P Global is not responsible for either the content or output of external websites. S&P Global keeps certain activities of its divisions separate from each other in order to preserve the independence and objectivity of their respective activities. As a result, certain divisions of S&P Global may have information that is not available to other S&P Global divisions. S&P Global has established policies and procedures to maintain the confidentiality of certain nonpublic information received in connection with each analytical process. S&P Global may receive compensation for its ratings and certain analyses, normally from issuers or underwriters of securities or from obligors. S&P Global reserves the right to disseminate its opinions and analyses. S&P Global Ratings’ public ratings and analyses are made available on its sites, www.spglobal.com/ratings (free of charge) and www.capitaliq.com (subscription), and may be distributed through other means, including via S&P Global publications and third party redistributors.
