Filters
Your Selections
    Reset
    Save Cancel
    Asset
    Published
    Vehicle Domain
    Topical Categories
    Supplier
    OEM
    Region / Country/Territory
    FISITA World Mobility Conference 2025: Key themes and concerns for the automotive industry
    One thing is abundantly clear after the FISITA World Mobility Conference (WMC) last week. Megatrends impact everything. No longer can chassis development, braking, safety validation and so forth stand alone without impact from the broader drive towards electrification, the AI revolution or SDVs, to name a few.  The event’s sessions gave the impression that electrification is already baked into the industry, particularly in Europe where the debate on (regulation-pushed) direction is ...
    Insights
    Beyond horsepower: Compute becomes the new competitive edge for OEMs
    Automotive compute power is becoming a defining metric of vehicle capability — not just for autonomy, but across cockpit systems, connectivity and life-cycle software deployment. As vehicles transition toward centralized electrical/electronic (E/E) architectures and software-defined platforms, silicon performance is now a core determinant of what a vehicle can do — and how long it will remain competitive in the field. Two metrics have emerged as industry standards for measuring this compu...
    Insights
    Brembo and Michelin form strategic partnership to enhance vehicle safety and performance
    Brembo and Michelin have entered a global partnership leveraging their collective expertise in braking solutions and tire manufacturing to revolutionize vehicle performance, focusing on enhancing driver safety and comfort. Brembo brings to the table its prowess in braking systems, vehicle modeling and AI, while Michelin contributes its expertise in tire modeling and algorithm development. The collaboration centers around the integration of Michelin's connected solutions software with Brembo's...
    News
    Brembo acquires suspension technology manufacturer Öhlins Racing
    In a press release on Oct. 11, Brembo, a brake system manufacturer, has announced its acquisition of Öhlins Racing from Tenneco, a move facilitated by funds managed by affiliates of Apollo Global Management. Brembo aims to expand its product offerings in the automotive market by incorporating Öhlins' highly regarded suspension technology. Öhlins Racing, headquartered in Upplands Väsby, Sweden, is known for its precision and performance in suspension technology, serving both the original e...
    News
    Brembo begins construction on first production site in Thailand, invests €40 million
    Brembo, a leading global braking systems manufacturer, has begun constructing its first production site in Thailand, investing approximately €40 million. The new site in Rayong province, south of Bangkok, will manufacture braking systems for motorcycle manufacturers in the country, starting with European and US producers. The site is expected to employ about 150 people once it is fully operational. According to Daniele Schillaci, Brembo's CEO, the investment marks a significant step in the ...
    News
    Brembo unveils new eight-piston aluminum brake caliper
    Italian automotive breaking-systems maker Brembo announced the launch of its new eight-piston aluminum brake caliper called Octyma, which blends style, design and identity with functionality, performance and cutting-edge content, the company said in a September 14 press release. According to the company, Octyma has been exclusively designed for the new Range Rover Sport SV. It is a front caliper distinguished by its innovative cross layout for the eight pistons, promising maximum br...
    News
    Brembo Q1 FY 2023 revenue grows 12.2% YOY to €961.9 million
    Italian auto-component maker Brembo reported a total revenue of €961.9 million, up 12.2% year over year in the first quarter of fiscal year 2023. The company has witnessed growth across all the key segments including passenger cars up by 12.9%, motorcycles applications up by 3.0%, applications for commercial vehicles by 14.0%, and racing applications by 23.4% compared to the same quarter of 2022. The EBIT amounted to €104.0 million compared to €92.9 million for the first qua...
    News
    Brembo’s H1 2022 revenue grows 27.94% y/y to USD1.82 billion
    Brembo has reported first half 2022 revenue at EUR1.74 billion (USD1.82 billion) with a year-on-year (y/y) increase of 27.94% compared to EUR1.36 billion from the previous year for the six months ended 30 June, according to a filing by the company on 28 July. Operating income for first half 2022 was reported at EUR187.5 million. Net income for first half 2022 was reported at EUR148.9 million. Significance: According to Brembo’s financial statement, the company reported strong performan...
    News
    Carbon ceramic brakes: Expanding beyond the luxury and ultra-high performance segments
    While growth in the luxury and ultra-high performance vehicle segments has driven a progressive increase in demand for specialized carbon ceramic brake discs, component manufacturers of the particular tech have over the last few years increasingly looked toward expanding market share by penetrating the broader high-performance disc brake market that is currently dominated by ventilated cast iron rotors. This article will provide an extended discussion into how carbon ceramic discs are differe...
    Insights
    Brembo's Q1 2022 revenues up 27% y/y to USD904.8 million
    Italian manufacturer of automotive braking components and systems, Brembo has generated a revenue of EUR857.6 million (USD904.8 million) during first quarter of 2022, representing an increase of 27% from the previous corresponding period. Its net profit increased to EUR71.7 million from EUR61.4 million a year earlier, it said in a press release on 11 May. “The figures for the first quarter of 2022, approved today by the Board of Directors, show increased turnover and margins compared to the...
    News
    Brembo to supply brake caliper assembly to Faraday Future for FF 91 EV
    US-based EV maker Faraday Future has announced that the company’s flagship vehicle FF 91 EV will be equipped with Brembo’s full brake caliper assembly, according to a press release published by the automaker on 25 April. Faraday Future’s FF 91 EV is expected to be launched in third quarter 2022, press release added. Carsten Breitfeld, global CEO of Faraday Future, said, “Brembo, a world leader in braking systems, perfectly complements the requirements of an ultra-premium EV su...
    News
    Brembo unveils new SENSIFY™ intelligent braking system
    Italian brakes manufacturer announced via press release on 25 October its new pioneering intelligent braking system, SENSIFY™, integrating the most advanced software based on artificial intelligence (AI). According to the press release, SENSIFY™ will combine Brembo’s current product portfolio of calipers, discs, and friction materials with digital technology and AI to create a flexible and revolutionary platform that includes software, predictive algorithms, and data managemen...
    News
    Brembo releases financial results for Q3 FY 2021
    Italian brakes manufacturer Brembo announced via press release on 9 November the company's results for the third quarter of financial year (FY) 2021. According to the press release, the highlights for the quarter were: Revenues​​ of USD772 million, 11.9% higher than third–quarter FY 2020 revenue​ EBITDA​​ was USD126 million, 10% lower than third–quarter FY 2020 EBITDA Net profit was USD47 million, 19.4% higher than third–quarter FY 2020 profit The supplier ...
    News
    Brembo to establish center of excellence in California’s Silicon Valley
    Italy-based manufacturer of brake components and systems, Brembo, has announced the opening of its first center of excellence in the Silicon Valley region of California, US. According to a press release issued by Brembo on 19 July, the company stated that the Brembo Inspiration Lab will be an innovation lab focused on strengthening the company’s expertise in software development, data science and artificial intelligence (AI). This new facility is scheduled to open in the fourth quarter of 2...
    News
    Brembo’s reports 17.2% y/y rise in Q1 2021 revenues to USD792.3 million
    Italian manufacturer of automotive braking components and systems, Brembo, has released its financial results for the first quarter of 2020. According to a press release issued by the company on 10 May, Brembo generated revenue of EUR675.1 million (USD792.4 million) during first quarter of 2021. This represents a fall of 17.2% year on year (y/y) from the EUR575.9 million in revenue that Brembo registered during the same time frame of 2020. The company also exhibited an increase in net profit of ...
    News
    Brembo FY 2020 revenue slides 14.8% y/y to USD2.63 billion
    Italy-based automotive components supplier Brembo has posted its financial results for the full fiscal year (FY) 2020. According to a press release issued by Brembo on 4 March, the company posted a total sales figure of USD1.85 billion, which implies a reduction of 14.78% year over year (y/y) from the USD2.33 billion generated during FY 2019. Brembo’s operating income for FY 2020 stood at USD321.88 million, down from FY 2019 levels of USD462.2 million. The company posted a net income of USD...
    News
    Brembo provides brakes for Cadillac CT4-V Blackwing and CT5-V Blackwing
    Brembo is supplying brakes for the new 2022 Cadillac CT4-V Blackwing and CT5-V Blackwing, the Italian brake supplier said in a press release on 1 February 2021. Brembo will provide its lightweight, high-performance cast-iron disc system as standard on both vehicles. Brembo’s advanced carbon-ceramic brake system will be available on the supercharged, 668 hp CT5-V Blackwing, which is a first-of-its-kind option for Cadillac, the company said in a statement. “We are excited to provide Cadilla...
    News
    Brembo’s Q3 2020 revenue slides 5.9% y/y to USD719.88 million
    Italy-based manufacturer of automotive braking components and systems, Brembo, has published its financial results for the third quarter of 2020. According to a press release issued by Brembo on 9 November, the company generated revenues of EUR608.8 million (approximately USD719.88 million) during the third quarter 2020 period. This represents a reduction of 5.9% year over year (y/y) from the EUR647.1 million recorded in revenue during the third quarter of 2019. Brembo’s revenue figure...
    News
    Brembo to introduce more digital solutions as part of new business strategy
    Italian supplier of braking components and systems, Brembo, has announced that it aims to use smart and sustainable digital products and services in order to become a solution provider. According to a press statement issued by Brembo on 16 September, the company intends to use its technological expertise to ensure that each new Brembo product is “greener” than the preceding one. The company unveiled on its digital platform, Brembo Next, two new solutions: the Greentive brake disc, wh...
    News
    Brembo introduces Greentive brake disc with low brake dust emissions
    Brembo has unveiled a new brake disc Greentive®, the brake supplier said in a press release on 16 September. The company said that the new disc with high technological characteristics is designed specially to meet the demands of premium and luxury cars. Significance: The new brake disc features a layer of coating applied to its ring, using High-Velocity-Oxy-Fuel (HVOF) technology. The coating offers a high level of corrosion resistance, a feature particularly important in the new generation ...
    News
    Brembo supplies braking solutions for Maserati MC20
    Brembo is supplying braking solutions for the new Maserati MC20, the braking systems supplier said in a press release. The company is supplying its radial mounted monobloc 6-piston brake calipers for the front. The calipers converge on 390 x 36 mm Brembo CCM (carbon ceramic material) brake discs, offering improved stopping power. At the rear, the vehicle is equipped with Brembo 4-piston monobloc brake calipers that converge onto 360 x 28 mm Brembo CCM brake discs. Brembo has designed six differe...
    News
    Aluminum brake calipers to experience increased demand after 2025
    Over many years of automotive innovation, vehicle safety has experienced many innovations and developments in order to keep occupants safe under almost all circumstances. Tracing back, the very first automotive safety feature is the braking system. Automotive brakes have also gone through their fair share of innovation—with brake drums being replaced by discs; different materials being tried for discs including cast iron, carbon composites, and ceramic; and the number of pistons being increase...
    Insights
    Brembo’s H1 2020 revenue slides 28.2% y/y to USD1.12 billion
    Italy-based automotive braking systems manufacturer, Brembo, has announced its financial results for the first half of 2020. According to a press release issued by Brembo on 29 July, the company’s first half of 2020 revenue stood at EUR951.1 million (approximately USD1.12 billion), which implies a decline of 28.2% year-over-year (y/y), compared with EUR1.32 billion that the company generated during the first half of 2019. The fall in revenue has been attributed to the gradual spre...
    News
    Brembo’s Q1 2020 revenue drops 13.7% y/y to USD622 million
    Italian manufacturer of automotive braking components and systems, Brembo, has released its financial results for the first quarter of 2020. According to a press release issued by the company on 11 May, Brembo generated revenue of EUR575.9 million (USD621.97 million) during first quarter 2020. This represents a fall of 13.7% year on year (y/y) from the EUR667.1 million in revenue that Brembo registered during the same time frame of 2019. The company had suspended manufacturing operations at i...
    News
    COVID-19 pandemic: Brembo restarts certain operations in Italy
    Italian manufacturer of braking systems, Brembo, has announced that it has resumed some of its operations in Italy. According to a press release issued by Brembo on 27 April, the company has stated that certain operations have been restarted at its manufacturing plants located at Curno, Mapello, and Sellero. The decision was taken to partially resume operations following the recently announced extraordinary provisions outlined by the Government of Italy. Significance: Manufacturing operations...
    News
    COVID-19 pandemic: Suppliers in Italy are at risk if they do not resume operations soon, says Brembo CEO
    Automotive companies in Italy will be at risk if the country’s supply-chain does not resume operations from this week, Brembo’s chairman Alberto Bombassei told an Italian daily Il Sole 24 Ore in an interview last week. “If the Italian supply chain does not return to operation next week, albeit at a slower pace than normal, and does not hook up to the German train, which in the meantime will have restarted completely, the future of our companies will be put at risk,” Bombassei said. ...
    News
    COVID-19 pandemic: Brembo extends temporary closure of plants in Italy
    Italian brake components manufacturer Brembo has announced that it will be extending the temporary shutdown of all of its production facilities across Italy until further notice, according to a press statement released by the company on 11 April. This move follows a mandate from the government of Italy to extend the nationwide lockdown in the country until 3 May in an attempt to stem the spread of the coronavirus disease 2019 (COVID-19) pandemic. Significance: This indefinite extension of ...
    News
    Brembo acquires 2.43% stake in Pirelli
    Italian manufacturer of braking systems, Brembo, has bought a minor stake in tire maker Pirelli. According to a report filed by news agency Reuters on 31 March, the company has purchased a long-term stake in Pirelli that amounts to 2.43%. The stake, which was reportedly purchased autonomously, will be held both directly and indirectly. Significance: The shares of Pirelli are trading at a level close to its lowest ever since the company went public again in 2017. Pirelli has also stated that i...
    News
    COVID-19 pandemic: Brembo to extend plant shutdown in Italy till 3 April
    Brakes-supplier Brembo has announced a further extension of production suspension of its Italian operations in Stezzano, Curno, Mapello, and Sellero until 3 April due to the emergency situation in Lombardy caused by the coronavirus disease 2019 (COVID-19) pandemic and the extraordinary measures taken by the Italian government, the company said in a press release on 26 March. Significance: Earlier on 23 March, Brembo announced an extension of the temporary suspension of its four Italian p...
    News
    COVID-19 pandemic: Brembo extends production suspension in Italy until 29 March
    Italian brakes supplier Brembo announced on 19 March that it would extend the temporary suspension of its four Italian plants in Stezzano, Curno, Mapello, and Sellero until 29 March due to the coronavirus disease 2019 (COVID-19) pandemic. “For the company, postponing is an act of responsibility, necessary to protect the health and safety of its people and to intensify collective measures to contain the spread of the virus,” the company said in a statement. Significance: The tempor...
    News
    Brembo’s FY 2019 revenue drops by 1.8% y/y to USD2.94 billion
    Italian brake manufacturer Brembo has released its financial results for the fiscal year of 2019. According to a press release issued on 9 March, the company has stated that its revenue for the fiscal year of 2019 period stands at EUR2.59 billion (approximately USD2.94 billion). This represents a decline of 1.8% from the revenue of EUR2.64 billion registered by the company during FY 2018. The net profit of the company for FY 2019 was EUR231.3 million, which decreased by 3% from the FY 20...
    News
    Brembo’s revenue drops 1.97% y/y to USD713.42 million in Q3 2019
    Italian manufacturer of brakes and other components, Brembo, has released the financial results for the period ended September 30th, 2019 in a press statement issued on November 7th. The company’s Q3 2019 revenue stands at EUR647.1 million (approximately USD713.42 million), which is a decline of 1.97% from the EUR660.1 million during the third quarter of 2018. During the first nine months of 2019, the company earned a revenue of EUR1.97 billion, which was lower by 1.4% from the almost EUR2 ...
    News
    Intelligent braking: Trends and drivers
    Vehicle systems today are increasingly attempting to reduce driver dependence in the event of a crash, apart from day-to-day driving. Braking systems are also being looked at from a critical eye in this respect, in order to further the safety cause in an imminent autonomous future. No longer looking to develop completely manually operated brakes, automakers and suppliers are turning to electronics to assist drivers when braking, by way of brake assist, emergency braking, and other such functions...
    Insights
    IAA 2019: Brembo presents ‘Dyadema’ aluminum brake caliper
    Brembo will present its new product Dyadema™, the exclusive new brake caliper for supercars, at the IAA 2019, scheduled to begin in Frankfurt, Germany, this week, the company said in a press release on 9 September. Dyadema™ is a monobloc 6-piston aluminum caliper featuring innovative air cooling technology, incorporated during the casting process. Significance: Brembo claims that the increase in airflow reduces the brake fluid temperature up to 15% over a standard caliper, allowing the sy...
    News
    Brembo supplies brake components for 2020 Corvette Stingray
    Brembo will supply brake components for the all-new 2020 Chevrolet Corvette Stingray, Brembo said in a press release on 26 July. The company will supply brake components on all four corners of the mid-engine Corvette Stingray. Two separate brake package offerings will be available with the Corvette Stingray and the Corvette Stingray with the Z51 Performance Package, according to the press release. Brembo’s all-aluminum four-piston calipers will be equipped on the Corvette Stingray. In addition...
    News
    Brembo’s H1 net income down 11.9% y/y to USD140.3 million
    Brembo has reported a 11.9% year-on-year (y/y) decline in net profit to EUR123.4 million (USD140.3 million) for the first six months ended 30 June 2019, according to a press release on 26 July. Revenue for the period year were down 1.2% y/y to EUR1.3 billion. Brembo’s EBITDA rose 4.1% y/y to EUR270.6 million, while EBIT declined by 6.3% y/y to EUR174.5 million. Net financial debt decreased significantly from EUR263.1 million to EUR251.7 million. Application-wise, the company posted growth a...
    News
    Brembo’s 2018 net profit down 9.5% y/y to USD272.6 million
    Brembo has reported a 9.5% year-on-year (y/y) decline in net profit to EUR238.3 million (USD272.6 million) for the financial year ended 31 December 2018, according to a press release by the company in March. Revenue for the fiscal year grew 7.2% y/y to EUR2.6 billion. Brembo’s EBITDA rose 4.4% y/y to EUR500.9 million, while EBIT declined marginally, by 0.3% y/y, to EUR345.1 million. Net financial debt decreased significantly from EUR240.7 million to EUR136.9 million. Application-wise, the c...
    News
    Brembo, Nissan technicians develop bespoke braking system for 2020 Nissan GT-R NISMO and Track Edition
    ​​​​​​​​​Brembo, in collaboration with Nissan technicians, has developed a bespoke braking system for the 2020 Nissan GT-R NISMO and Track Edition, according to a Brembo press release last month. Brembo is providing front and rear aluminum monoblock calipers (one piece) bespoke design for Nissan GT-R NISMO for reduced weight, while offering maximum stiffness and cooling. In addition, the supplier is supplying front and rear carbon ceramic brake discs for the model. “Brembo...
    News
    Brembo appoints Daniele Schillaci new CEO
    Brembo has appointed Daniele Schillaci as its new CEO, effective 1 July 2019, the Italy-based braking supplier said in a press release. Schillaci will replace the current CEO Andrea Abbati Marescotti who has decided to step down at the end of this quarter (30 June) to pursue other interests. Schillaci will report to Brembo’s executive vice chairman Matteo Tiraboschi. “Daniele Schillaci is a top-level executive with a solid global experience and a deep understanding of the automotive marke...
    News
    2019 Geneva Motor Show: Lightweight, high-performance chassis component technology, platform sharing gain traction
    Geneva International Motor Show (GIMS) is the first big car show for the year for the European automotive market. Showcases pointed to a renewed product focus on performance and sports cars, as well as high-end SUVs. This trend has been visible across other global shows this year, such as 2019 NAIAS. GIMS 2019 hosted automakers offering improved electronic suspensions along with high performance brakes to cater to sport models. EV offerings with regenerative braking were peppered across the s...
    Insights
    Brembo inaugurates new aluminum brake calipers production plant in China
    Brembo has opened a production facility to manufacture aluminum brake calipers and knuckles in Nanjing in China's Jiangsu province, the company announced on 3 April. The company has informed that all production stages will be integrated into the new site, from delivery of raw material to shipping the finished product, in order to better serve customers in Europe, Asia, and North America. The 430,000-square-foot plant currently employs 450 people, has 67 production lines, and is capable...
    News
    Chassis sector wrap-up 2018
    2018 has been a busy year for the global chassis components sector as a major shift toward weight savings and electronification of braking, steering, and suspension systems emerged. The word active was abundantly used across the chassis components sector as the industry came to understand the benefits of having such a system. With a focus on adaptive and dynamic features to increase customer comfort and convenience, apart from vehicle handling, IHS Markit expects the next few years to be impe...
    Insights
    Brembo FY2017 sales rise 8.1% y/y to USD2.76 billion
    Italian manufacturer of braking components, Brembo, has published its financial results for the 2017 fiscal year. According to the company’s annual report, Brembo recorded sales of EUR2.46 billion (approximately USD2.76 billion) during the fiscal year of 2017. This implies an increase of 8.1% year-over-year (y/y) from the EUR2.28 billion generated in sales during the FY2016 period. Significance: Brembo also registered an increase in its operating income from EUR443.71 million during FY2016 ...
    News
    Brembo starts operations at new cast iron foundry in Mexico
    Brembo has started operations at its new cast iron foundry in Escobedo, Mexico, according to a company press release. The Italy-based braking system supplier reported successful first pouring at the new foundry on Monday (20 November). The 269,000-square feet foundry will cast iron rotors for Brembo’s nearby disc machining plant in the region. The foundry’s annual melting capacity is approximately 70,000 tonnes. The facility will cater to American, European and Asian OEMs who are or will ...
    News
    Brembo’s 2016 net profit up 30.8% y/y to USD253.4 million
    Italian manufacturer of automotive brake systems Brembo has reported a 30.8% year-on-year (y/y) jump in net income for fiscal year ended 31 December to EUR240.6 million (USD253.4 million), according to a company press release. Revenues for the period grew 9.9% y/y to EUR2.28 billion and EBIT stood at EUR327.5 million, a jump of 30.3% y/y. Geographically, the company’s sales grew in all regions except South America. Sales increased 9.7% y/y in Germany to EUR528.3 million; 12.4% in the United...
    News
    Geneva Motor Show 2017: Brembo introduces aluminum brake caliper
    Brembo is showcasing a new electromechanical combined sliding (ECS) brake caliper made of aluminum at the 2017 Geneva International Motor Show this week.  The new aluminum brake caliper will be equipped on the new Alpine A110, reports Tire Review. Significance: The new lightweight caliper integrates service and parking brake functions in a single body, thanks to the gearmotor developed by Brembo. The ECS caliper offers excellent braking performance, thanks to its optimized friction mater...
    News
    Mexico's light-vehicle sales up 18.6% y/y in 2016, production grows 2% y/y
    Mexico's light-vehicle (LV) sales surged at double-digit percentage rates, growing 18.6% over the year in 2016, according to the latest data from the Mexican Automotive Industry Association (Asociación Mexicana de La Industria Automotriz: AMIA); this is also the best December on record, the association noted. In December 2016, sales increased 19.9% year on year (y/y) and full-year sales reached 1.6 million units. This compares with a gain of 19.1% in 2015 and sales of 1.35 million units. Mexico...
    News
    Suppliers to the new Honda Civic
    The 10th generation Honda Civic is built on Honda's CCA platform. Assembly of the new Honda Civic began in July 2016 at Honda’s Swindon facility. According to IHS Markit Automotive production forecasts, output is expected to peak in 2017 at more than 120,000 units. If you would like your company included in this feature, or the car cutaways published in Automotive News or Automotive News Europe, please e-mail aman.kapoor@ihsmarkit.com. ...
    Insights
    Brembo’s Q3 net income up 37% y/y to USD65.4 million
    Italian manufacturer of automotive brake systems Brembo has reported a 37% year-on-year (y/y) jump in net income for third quarter ended 30 September to EUR59.1 million (USD65.4 million), the company announced in a press release on 7 November. Revenues for the same period jumped 11.1% y/y to EUR566.8 million and EBITDA stood at EUR110.6 million (19.5% of revenue), a jump of 20.3% y/y. In the first nine months, the net income grew 41% y/y to EUR186.2 million and the revenue was EUR1.71 billion...
    News
    Brembo inaugurates new brake plant in Mexico, announces additional investment
    Italy-based braking system supplier Brembo has inaugurated a new plant in Escobedo, in the state of Nuevo Leon in Mexico, built with an investment of USD36 million, the company said in a press release on 20 October, adding that it plans to invest an additional USD93 million on a new foundry to produce cast iron discs, that will come up next to this plant. The plant is spread over 377,000 square feet and will add sales of USD100 million per year to Brembo’s turnover. It will also create 500 ...
    News
    Brake caliper material trends
    Cast-iron has historically dominated the caliper materials sector, owing to its relative low cost and good mechanical properties. However, the use of bigger brake discs to enable higher braking power has resulted in the need to deploy bigger calipers, resulting in an increase in weight, adding to the car’s unsprung weight. The vehicle’s ride quality is negatively impacted by this increase in unsprung weight. The lower the unsprung weight, the less work the shocks and springs have to do to...
    Insights
    China braking market trends
    The Chinese brake market is becoming increasingly sophisticated, adding several brake types such as Anti-Lock Brake System (ABS) and electronic parking brake (EPB) that were previously not present or held a niche segment in the market. In 2015, Germany-based Continental reported in its Q2 earnings call, that content per vehicle in China is increasing much faster than Europe and the United States, as the Chinese want more modern products. IHS expects market value of global automotive braking mark...
    Insights
    Brembo’s H1 net up 43% y/y to USD141 million
    Brembo’s net profit increased 42.8% year-over-year (y/y) to EUR127.1 million (USD140.9 million) in the first half ended 30 June 2016, the Italy-based braking systems supplier said in a press release. The company recorded 29.5% y/y growth in EBITDA to EUR226.5 million (USD251 million), and its EBIT increased 42.9% y/y to EUR173.3 million (USD192.1 million). Brembo reported strong growth in profit driven mainly by 10.4% y/y increase in revenues to EUR1.14 billion (USD1.26 billion). The company...
    News
    Brembo completes 66% ownership in ASIMCO Meilian Braking
    Brembo has acquired a 66% stake in China-based ASIMCO Meilian Braking Systems (Langfang) Co., Ltd., the Italian brake system supplier said in a press release last week (19 May 2016). The company will pay CNY574.4 million (USD88.0 million) for the stake in ASIMCO, while the remaining 34% will be held by the state-owned Langfang Assets Operations Co. Ltd., controlled by the Municipality of Langfang. Brembo, however, said that the final price might be subject to closing-related adjustments. &n...
    News
    Brembo’s Q1 net profit up 32% y/y to USD68 million
    Brembo has reported a 31.9% year-over-year (y/y) increase in net profit to EUR60.4 million (USD68.3 million, 31 March 2016) for the first quarter ended 31 March 2016, driven mainly by a 9.6% y/y growth in sales to EUR563.6 million (USD637.6 million), the Italy-based brake systems supplier said in a press release. On constant exchange rates, sales increased by 10.5% y/y. Higher sales helped Brembo to record 27.9% y/y increase in EBITDA to EUR109.7 million (USD124.1 million) while EBIT grew at a h...
    News
    Brembo to begin production at new cast iron foundry in US' Michigan state this month
    Brembo has conducted first pour at its all-new cast iron foundry in Homer, Michigan (United States). The Italy-based braking system supplier will commence production at the 266,000 square feet foundry facility this month, the company said in a press release last week. The foundry, located adjacent to Brembo’s 440,000-square feet facility in Homer that machines discs and drums for original equipment (OE) market, is expected to be fully operational next year. At full capacity, the plant will pro...
    News
    Suppliers to the new Aston Martin DB11
    Publicly unveiled at the 86th annual Geneva Motor Show in March 2016, the all-new Aston Martin DB11 is the first new model launched under the company's so called 'Second Century Plan'. Powered by an in-house-designed 5.2-litre twin turbocharged V12 engine and built upon a new bonded aluminium structure, the DB11 is the most powerful and efficient DB model in Aston Martin's history. A ZF-supplied eight-speed automatic transmission and torque converter help to ensure that delivery of the new ...
    Insights
    Brembo net income up 42% y/y to USD201 million in 2015
    Brembo’s net sales increased 15% year on year (y/y) to EUR2.07 billion (USD2.26 billion, 31 December 2015) in the financial year ended 31 December 2015, according to a company press release. The company's EBITDA was up 28.6% y/y to EUR359.9 million (USD393.2 million), and net income jumped 42.5% y/y to EUR184 million (USD201 million). Segment-wise, Car applications sales were up 18.8% y/y to EUR1.5 billion (USD1.6 million) in 2015, and Commercial and industrial vehicles (CVs) sales were up...
    News
    GM launches Cadillac CT6 in China featuring CUE infotainment system, night vision system
    SAIC-GM has launched the Cadillac CT6 sedan in China, priced between RMB439,900 (USD66,000) and RMB 818,800. A 12.3-inch customizable color digital LCD touchscreen presents detailed vehicle information to the driver in a clear, easy-to-read manner. The Cadillac User Experience (CUE) infotainment system features a 10.2-inch interface screen. It integrates the CarPlay system, which enables an iPhone to control the center console display or vice versa. Available OnStar 4G LTE with Wi-Fi hotspot can...
    News
    Brembo's Q3 net profit up 42% y/y USD48.3 million
    Brembo’s net sales increased 16.3% year on year (y/y) to EUR510.2 million (USD573.4 million, 30 September 2015) in the third quarter that ended 30 September 2015. The company's earnings before interest, taxes, depreciation, and amortisation (EBITDA) was up 39.9% y/y to EUR91.9 million (USD103.3 million), and net income jumped 42.0% y/y to EUR43.2 million (USD48.3 million). Car applications contributed 76.0% to Brembo’s total sales in the third quarter of 2015; the segment's sha...
    News
    Mergers and acquisitions (Issue 8, 2015)
    Acquirer Acquired Business Sector Comment Brembo ASIMCO Meilian Braking Systems (ASIMCO) Cast-iron Foundry Italian brakes maker Brembo has agreed to acquire 66% stake in China-based ASIMCO Meilian Braking Systems (ASIMCO) for CNY616 million (USD96.6 million). The rest of the 34% stake in the Langfang, Hebei province-based ASIMCO M...
    Insights
    Brembo to acquire 66% share in ASIMCO Meilian Braking Systems, China
    Italian brakes maker Brembo has agreed to acquire 66% stake in China-based ASIMCO Meilian Braking Systems (ASIMCO) for CNY616 million (USD96.6 million), the company said in a press release yesterday (29 September). The rest of the 34% stake in the Langfang, Hebei province-based ASIMCO Meilian is held by the state-owned Asset Operation Co. Ltd. Commenting on the acquisition, Alberto Bombassei, chairman, Brembo said “China is consistently the biggest car market in the world and this is also ...
    News
    Brembo showcases in-wheel architecture at 2015 IAA
    Italian brake systems supplier, Brembo has previewed its in-wheel architecture in a vehicle at the 2015 IAA, according to a company press release. The unnamed vehicle uses a brake-by-wire (BBW) electromechanical system with a lightweight caliper and disc. After three years of experimentation, the company has fitted a car with four electric motors, one for each wheel. Each motor delivers 90 kW of maximum power and 900 Nm of maximum torque, averaging 60 kW and 600 Nm respectively. These motors com...
    News
    Brembo launches new five openings caliper for high-end cars at IAA 2015
    Brembo has presented a new five openings caliper for high-end cars at the IAA 2015 being held in Frankfurt, Germany, the company said in a press release yesterday (15 September). The caliper maintains the required stiffness and is 8% lighter in weight. Available in 17-inch (5.9 kg in weight), 18-inch (7.7 kg) and 19-inch (8 kg) versions, the new caliper is geared towards cars with discs and a high braking surface. The caliper has five openings: two at the front of between 16 and 22 square cm, an...
    News
    Brembo's H1 net profit up 39% y/y to USD97.9 million
    Brembo’s first half net profit grew 39% y/y to EUR89 million (USD97.9 million), the company reported in a press release yesterday (30 July). The revenues for the period grew 15.2% y/y to EUR1.03 billion (USD1.12 billion) and EBITDA grew by 23% y/y to EUR175 million (USD192.5 million). Commenting on the results, Alberto Bombassei, chairman of Brembo, said, “Brembo pursues its strategy aimed at expanding and strengthening its productions sites, confirming growth prospects for the second half o...
    News
    The United States’ improving automotive market conditions
    North America remains a major bright spot among mature markets for automotive suppliers. Local production volumes have surpassed pre-crisis levels and are at an all-time record with 17 million units expected to be produced in 2015. New OEMs are investing in the region and those already present are expanding or devising their plans to expand their production footprint in the region. Audi is building a new facility in Mexico and Japanese carmakers have just opened, or are in the process of buildin...
    Insights
    Brembo exhibits new pillar venting technology at Autopromotec trade show in Italy
    Brembo is exhibiting a new PVT Plus system, a new pillar venting system, at the 26th Autopromotec trade show in Bologna, Italy, says a company press release. PVT stands for pillar venting technology. Braking systems of passenger cars can overheat, which could potentially generate thermal cracks and breakage at the disc surface. The company says the new venting system offers more resistance to thermal cracks and less wear on brake pads. Significance: According to the company, with the new ve...
    News
    Brembo's Q1 net income up 27.5% y/y to USD49.6 million
    Brembo's net income increased 27.5% year-on-year (y/y) to EUR45.8 million (USD49.6 million, 31 March 2015) in the first quarter ended 31 March 2015, says a company press release. EBIT was up 25.1% y/y to EUR59.1 million (USD64.1 million); sales grew 15.1% y/y to EUR514.3 million (USD558 million). Segmentally, sales of components manufactured for Cars contributed 71.5%, or EUR368 million (USD399.2 million), to Brembo’s total sales in the first quarter of 2015, while sales to Commercial and ...
    News
    Mazda announces full MX-5 pricing; US-bound production kicks off
    Mazda announced yesterday (20 April) that the first US-bound 2016 Mazda MX-5 Miata production has begun, and released pricing for the full range. The first 1,000 cars will be special Launch Edition models, with the full range including three trim levels. The Launch Edition starts at a manufacturer’s suggested retail price (MSRP) of USD30,495. The base car is the Sport, starting at USD24,195, with a longer standard-feature list than previous generations, with Bluetooth phone pairing and streami...
    News
    Cadillac updates ELR, lowers price
    Cadillac has updated the ELR plug-in hybrid vehicle for the 2016 model year, as well as lowering the price. The car’s electric drive system offers power and torque increased more than 25%, GM said in a statement. Handling, steering and braking systems have been revised for more rewarding performance, and the car adds OnStar with 4G LTE and standard built-in wifi hotspot as standard equipment, as well as moving advanced driver assist systems from optional to standard. In terms of exterior, ...
    News
    Tesla exhibits Model S P85D at NAIAS 2015; updates Supercharger map
    Tesla has showcased the Model S P85D at the 2015 North American International Auto Show (NAIAS) in Detroit, United States. According to Hybrid Cars, the powertrain of the four-door sedan features a 221hp motor in the front of the car and a 470hp motor in the rear, offering a combined output of 691hp. In comparison, the Model S has a 380hp single-motor setup. According to Autoblog, the sedan can hit 60 miles per hour in 3.2 seconds and reach a top speed of 155 miles per hour. The P85D has a base...
    News
    Brembo to open new aluminium caliper production plant in Mexico in 2016
    Italy-based automotive brakes supplier Brembo plans to establish a new plant in Mexico, the company said a press release today (2 December). The 334,000 square feet facility will be located in Escobedo, Nuevo Leon. The new plant will produce 2 million aluminium calipers annually. The plant will supply to customers in the NAFTA region, including American, Asia, and European OEMs currently manufacturing or planning future manufacturing in Mexico, as well as Brembo’s customers in the United State...
    News
    Pirelli appoints Pierluigi Dinelli as new chairman, CEO for NAFTA
    Pirelli has named Pierluigi Dinelli, CEO for Pirelli Italia, as a new chairman and CEO of Pirelli’s NAFTA region, effective 1 January, according to Rubbernews. Dinelli succeeds Paulo Ferrari, who will become CEO of Pirelli Latin America. “I look forward to returning to America as the new chairman and CEO of Pirelli Tire North America,” Dinelli said. Dinelli rejoins the NAFTA team from Pirelli’s headquarters in Italy. He brings more than a decade of international experience to the pos...
    News
    Brembo’s Q3 net income up 51% y/y to USD38.6 million
    Italy-based automotive brakes supplier Brembo has announced its financial results for the third quarter and first nine months ended 30 September 2014. According to a company release, Brembo’s net sales increased 12% year on year (y/y) to EUR438.6 million (USD556.4 million, 30 September 2014) in the third quarter of 2014. Operating income was up 34.5% y/y to EUR39 million (USD49.5 million), while net income jumped 51.2% y/y to EUR30.4 million (USD38.6 million). Passenger cars contributed the mo...
    News
    Brembo supplies brakes for Chevrolet Corvette Z06
    Italy-based Brembo is supplying brakes for General Motors’ (GM) new 2015 Chevrolet Corvette Z06 car, says a company press release. GM acknowledged that at a speed of 60 mph, Brembo’s brake enables the new car to stop in 99.6 feet (30 metres) – the best braking performance of any production car the automaker has ever tested. This can be achieved through an optional ‘Z07 performance package’, which adds Brembo’s carbon ceramic brake rotors and France-based tire-maker Michelin’s Pilot...
    News
    Investments (Issue 6, 2014)
    Company Region Area of operation Investment Comment ABC Group U.S. Consoles, interior trims, and load floors USD25.5 million Canada-based automotive components supplier ABC Group plans to invest USD25.5 million to expand its existing facility in Tennessee, United States. The facility, to...
    Insights
    Brembo's net profit up 24% y/y to USD38 million in Q2 2014
    Brembo’s net profit increased 24.1% to EUR28.1 million (USD38.3 million, 30 June 2014) in the second quarter ended 30 June 2014, says a company press release. Sales stood at EUR454.8 million (USD620.5 million), up by 16.4% year-on-year (y/y). The company reported EBIT of EUR40 million (USD54.6 million) in the second quarter of 2014. Geographically, sales increased in all European countries, up 22.3% in Italy, 15.5% in Germany, 15.7% in France, 24.7% in the United Kingdom and 4.6% in other ...
    News
    Brembo to build new cast iron foundry in US, invest USD100 million
    Brembo plans to build a cast iron foundry near its Homer facilities in Michigan, United States, says a company press release. The company will invest EUR74 million (USD100 million) in the new foundry. The facility, spanning 30,000 square metres, will have an annual production capacity of up to 80,000 tons of brake disc castings. The construction is scheduled to commence in 2015 and is expected to complete in 2017. The foundry will create 250 jobs. The foundry will be financed with Brembo’s cas...
    News
    GM, suppliers receive approval for tax breaks on investments in Michigan facilities in US
    The Michigan Economic Development Council (MEDC) has approved tax breaks for General Motors (GM) and several suppliers this week, reports the Detroit News. In announcing the credits, the MEDC indicated that GM will invest USD800 million in Michigan (United States) facilities, as well as increase its Michigan-based headcount by 1,750, staff expected to be authorised specifically for the company's Warren Tech Center, where vehicle engineering, development, and design are carried out. A statement i...
    News
    Brembo opens expanded US manufacturing facility
    Brembo has started expanding its auto parts manufacturing facility in Homer, located in Michigan, United States. According to a company press release, Brembo will invest EUR83 million (USD113.6 million) in the expansion, which is scheduled to complete at the end of 2015. The Homer plant produces brakes, discs, calipers and corner modules. Commenting on the development, Brembo North America’s president and CEO, Daniel Sandberg, said, “The investment] renews our commitment to the North Ame...
    News
    Brembo net profit up 74% y/y to USD49.4 million in Q1 FY2014
    Brembo’s net income increased 74% year on year (y/y) to EUR35.9 million (USD49.4 million, 31 March 2014) in first quarter of financial year (FY) 2014 ended 31 March 2014 compared with EUR20.6 million (USD26.4 million, 31 March 2013) in the same period a year ago, said a company press release. Sales increased 20.2% y/y to EUR446.9 million (USD614.6 million) compared with EUR371.9 million (USD476.6 million) in the previous year. Earnings before income taxes (EBIT) grew 75.6% y/y to EUR45.9 milli...
    News
    Brembo net income up 14.4% y/y to USD122.5m in FY2013
    Brembo net income increased 14.4% year on year (y/y) to EUR89 million (USD122.5 million, 31 December 2013) in financial year (FY) 2013 compared with EUR77.8 million (USD102.8 million, 31 December 2012) in 2012, said a company press release. Sales increased 12.8% y/y to EUR1.56 billion (USD2.14 billion) compared with EUR1.39 billion (USD1.83 billion) in the previous year. Earnings before income taxes (EBIT) increased 35.6% y/y to EUR121.4 million (USD167.1 million) from EUR89.5 million (USD118.3 ...
    News
    Brembo to receive EIB grant for research on environment friendly brakes
    The European Investment Bank (EIB) will grant EUR55m (USD75.69m) to support Brembo’s research and development activity in the area of developing light and environment friendly braking systems, according to a press release. The grant will support a four-year project costing approximately EUR116m (USD159.6m) to improve the performance and safety standards of high-performance braking systems through identification of lighter materials and components capable of further reducing the environment...
    News
    Rising demand for cars boosting Brembo's brake business in US
    Rising vehicle production in North America, especially in the luxury and sports car segment, has been fuelling Brembo's brake business in the US, reports Reuters.  The high-performance brakes made by the Italian supplier is set to feature in several upcoming vehicles such as the 2015 Ford Mustang sports car, BMW X5 utility vehicle and  Tesla Model S electric sedan. Apart from high-end cars, the US consumers can purchase Brembo brakes as an option with cheaper models such as a USD15,000...
    News
    Brembo net profit up 50% y/y to USD27.2m in Q3 FY2013
    Brembo’s net income increased 50.4% year on year (y/y) to EUR20.1m (USD27.2m) in the third quarter (Q3) of 2013 compared with EUR13.4m (USD17.2m) in the same period in 2012, says a company press release. Operating income increased 50% y/y to EUR29m (USD39.2m) compared with EUR19.4m (USD24.9m). Sales increased 14.5% y/y to EUR391.5m (USD529.3m) from EUR342m (USD439.7m) in Q3 2012. Geographically, in Q3 2013, sales in Italy increased 7.1% y/y to EUR47.7m (USD64.5m), Germany sales increased ...
    News
    Brembo showcases new light brake disc concept at 2013 IAA
    Brembo is showcasing its new light brake disc concept at 2013 IAA, says a company press release. The new brake is 10-15% lighter compared with conventional brakes and has been developed in partnership with Daimler. The disc combines two different materials, cast iron and steel. Compared to a traditional cast iron housing that is 7.5-9mm thick, the steel housing in the new brake is only 2.5mm thick. The brake will be used in future Mercedes-Benz model range. Significance: Due to its lower we...
    News
    Brembo acquires remaining 30% stake in Chinese JV
    Brembo has acquired the remaining 30% stake in its Chinese joint-venture (JV) Brembo Nanjing Brake Systems from its Chinese partner Donghua Automotive Industrial Company for CNY90m (USD14.6m),  says a company press release. Brembo now owns 100% of the JV. Significance: Brembo set up the JV with Donghua Automotive Industrial Company (a subsidiary of SAIC), for processing and coating of cast-iron discs and aluminum fixed calipers for cars and commercial vehicles. The JV is a part of the ...
    News
    Suppliers to the new BMW X5
    ABC GROUP Windshield Washer Bottle System   APAG ELEKTRONIK          LED Based Door Handle Illumination                   AUTONEUM Brackets Heatshields                   BEHR F15/F15 Engine Cooling Module PTC heater Thrid Row PTC blower ...
    Insights
    Brembo to invest USD151m in North America and Brazil
    Brembo will invest EUR115m (USD150.8m) in North America and Brazil in the 2013-2015 period, says a company press release. The company will expand production in the Homer industrial hub in Detroit, Michigan (US) and its plant in São Paulo (Brazil). Investment in the US will total EUR83m (USD108.8m) and EUR32m (USD41.9m) will be invested in Brazil to move the current plant from São Paulo to a larger plant in Santo Antonio de Posse. Significance: Brembo is increasing production capacity afte...
    News
    Brembo net income more than doubles y/y to USD38m in Q4 FY2012
    Brembo net income has more than doubled year on year (y/y) to EUR28.8m (USD38m) in the fourth quarter (Q4) of 2012 compared with EUR12.3m (USD15.9m) in the same period in 2011, says a company press release. Operating income increased 37.3% to EUR20.8m (USD27.5m) compared with EUR15.1m (USD19.6m). Sales increased 11.2% EUR344m (USD454.6m) from EUR309.5m (USD400.7m) in Q4 2011. For the year ended 31 December 2012, sales increased 10.7% y/y to EUR1.39bn (USD1.83bn) compared with EUR1.25bn (USD...
    News
    Management changes (Feb 2013)
    Alcoa has appointed John Martin as the President of Global Primary Products, U.S.. Martin will be responsible for global primary product locations in the U.S. which includes six operating smelters, an alumina refinery and potlining recycling facility. Bob Lenney and Steve Rombough named as Massena’s East and West plant managers are Martin’s successors. American Axle & Manufacturing (AAM) has appointed Terry J Woychowski as Senior Vice-President, Engineering. Woychowski will lead AAM...
    Insights
    Suppliers to the new Ferrari F12berlinetta
    If you would like your company included in this feature, or the car cutaways published in Automotive News or Automotive News Europe, please email james.clark@ihs.com. Launched at the Geneva Auto Show in March 2012, the Ferrari F12berlinetta replaces the 599 as the automaker's grand tourer. When announced, the F12Berlinetta was the most powerful and high performance Ferrari ever. Thanks to an incredibly efficient engine in terms of combustion, fluid-dynamics and mechanical efficienc...
    Insights
    Brembo names Giorgio Ascanelli as Chief Technical Officer
    Brembo has appointed Giorgio Ascanelli as Chief Technical Officer (CTO) with effect from February this year, according to the company’s press release. Ascanelli will be responsible for Advanced Research and Technical Development departments. Ascanelli initially started his career as a mechanical engineer with ScuderiaFerrari and later served as a Technical Director for Maserati Corse and Scuderia Toro Rosso.
    News
    Suppliers to the new Mercedes-Benz A Class
    AGC AUTOMOTIVE Backlight glazing Front Door glazing Rear door fix (as Tier 2 to Fritz) Rear Door glazing   AUTOLIV Inflatable curtains Knee driver airbag Passenger airbag Side airbags Pre-pretensioners Radar system   AUTONEUM          Engine Undershields Heatshields Underbody shields Ultra Silent   BEHR          ...
    Insights
    Brembo net income increases 7.6% y/y to USD18.2m in Q2 2012
    Brembo’s net profit rose 7.6% to EUR14.5m (USD18.2m, 30 June 2012) in the second quarter (Q2) of FY2012 compared with EUR13.5m (USD19.4m, 30 June 2011) a year ago, according to a company press release. Sales increased 10% to EUR352.7m (USD443.6m) compared with EUR320.5m (USD461.2m) in Q2 2011 due to increased sales in Germany and the US. Operating income increased 9.5% to EUR25.4m (USD32m) from EUR23.2m (USD33.3m) in the previous year quarter. Geographically, in Q2 2012, sales in Italy were...
    News
    Brembo begins brake manufacturing in US for Detroit three automakers
    Italian performance brake supplier Brembo has begun manufacturing its product for the first time in the United States earlier this month, according to the Detroit Free Press. Those aluminum calipers, which are typically more at home on high-end German luxury cars, are now set to appear on the new 2013 Cadillac ATS sport sedan, arriving next month. A plant in Homer, Michigan, purchased from Hayes-Lemmerz will supply the ATS. That plant will produce brake discs, calipers, and corner module assembl...
    News
    Latest investments
    Company Region Area of operation Comment Kirchhoff Automotive Romania Automotive 26 April 2012: Kirchhoff Automotive has opened its first plant in Craiova (Romania), which will supply components to minivan B-Max, says a press release. The report suggests that a total of about EUR12m (USD15.8m, 26 April 2012) has been invested to update the plant covering an area of 12,000m2. The Craiova plant is expected to begin production by mid-May this year. According to Arndt Kirchhoff, President, ...
    Insights
    Brembo net profit surges 88.4% y/y to USD28.1m in Q1 2012
    Brembo’s sales in the first quarter (Q1) ended 31 March 2012 increased 12% to EUR349.9m (USD466.7m) compared with EUR312.2m (USD440.1m) in Q1 2011, according to a company press release. Operating income increased 21.3% to EUR23.9m (USD31.9m) from EUR19.7m (USD27.8m) in the previous year quarter. Net income increased 88.4% to EUR21.1m (USD28.1m) compared with EUR11.2m (USD15.8m) in Q1 2011. Geographically, sales in Italy increased 0.6% to EUR57.4m (USD76.6m), in Germany sales increased 18.8...
    News
    Brembo opens production plant in China
    Italian brakes maker Brembo has opened a new EUR70m (USD92.29m) plant in China, the supplier says in its AGM report. The plant is located in Nanjjing in China’s eastern Jiangsu province and will supply BMW, Mercedes, MG, Mitsubishi, Naveco, Volvo and Volkswagen. Brembo saw sales in China rise 11.6% year-on-year in 2011 to EUR 54.9m (USD71.08m, 31 December 2011), although overall China still only accounts for 4.4% of the company’s global sales. The plant has begun production. According to Reu...
    News
    Interview: Matteo Tiraboschi, Chief Financial Officer – Brembo
    How do you expect the balance of revenues between Passenger Car, Motorbikes, Commercial Vehicles, Racing Cars, Passive Safety and Miscellaneous to change in the next two years? We will probably see an increase in the percentage of car-related business. As we saw from the market in the third quarter of 2011, the global light vehicles market showed a 3.1% increase in sales over the third quarter of 2010, with a 4.5% growth for the first nine months of the year compared to the prior year. In this ...
    Insights
    Brembo Q4 2011 profits more than double to EUR12.3m
    Brembo has reported a more than two-fold increase in net profit in the fourth quarter of 2011. The company’s net profit grew to EUR12.3m, from EUR4.6m in Q4 2010. Earnings before interest and taxes (EBIT) was up by 66% year-on-year (y/y) to EUR15.1m, while pretax profit increased by 24.2% y/y to EUR7.5m. Consolidated revenues in Q4 2011 jumped up by 12.6% y/y to EUR309.5m. For the full year 2011, Brembo’s revenues increased to EUR1.25bn, from EUR1.07bn. The company’s net profit gained 33....
    News
    Brembo to supply calipers for 2013 Cadillac ATS
    Brembo will supply calipers for GM’s new 2013 Cadillac ATS and XTS model in the US, reports Motor Authority.  The new Cadillac ATS model is currently being showcased at the North American auto show in Detroit. The parts will be manufactured at the company’s Homer, Michigan facility, which has undergone expansion for the production. The plant has also expanded the range and type of discs it produces to include the unique two-piece rotors for Cadillac’s fabulous CTS-V group of vehic...
    News
    loading
    Searching our resources for you...
    Trending News
    Latest Podcasts
    Latest Reports
    Latest Insights
    Latest Profiles
    Latest Startups
    preload preload preload preload preload preload