Filters
Your Selections
    Asset
    Published
    Vehicle Domain
    Topical Categories
    Supplier
    OEM
    Region / Country/Territory
    Dutch move on Nexperia triggers nervousness among auto suppliers and OEMs
    On Monday, Oct. 13, the Dutch government took a decisive step to assume control of Nexperia, the Nijmegen-based semiconductor manufacturer owned by mainland China’s Wingtech. Officials described the intervention as “highly exceptional,” citing governance shortcomings, national security risks and the need to safeguard critical technological capabilities for the Netherlands and Europe. Nexperia, headquartered in Nijmegen, the Netherlands, has been owned by Wingtech since 2018. Wingtech is...
    A new tug of war for semiconductors: data centers vs. automakers
    The automotive semiconductor market has been navigating a period of unusual volatility. On one side, near-term demand pressures are easing. The slowdown in electric vehicle adoption is reducing average chip content per vehicle, since EVs typically contain significantly more semiconductors than internal combustion models. Tariffs are further dampening global vehicle demand. S&P Global Mobility estimates suggest up to 0.6 million fewer vehicles will be produced in 2026 because of trade barrier...
    Chery unveils in-house developed 600 Wh/kg solid-state battery module
    At the 2025 Chery Global Innovation Conference in Wuhu, mainland China, Chery Automobile revealed its first in-house developed, all-solid-state battery module with a cell energy density of 600 watt-hours per kilogram (Wh/kg). The module is among the highest announced by a mainland Chinese automaker so far. Developed by the Chery Solid-State Battery Research Institute, the battery module features an in situ polymerized solid electrolyte system with a lithium-rich manganese cathode materia...
    Geely deploys Raytron's automotive thermal camera on LEVC L380 to reduce night collisions
    Geely’s new premium electric multipurpose vehicle, the LEVC L380, features an Infrared Night Vision System (NVS) developed by Raytron to improve visibility in low-light and nighttime conditions. The system uses a thermal imaging camera to help detect pedestrians and obstacles in darkness, fog, or glare, where conventional cameras may be less effective. It is part of the vehicle’s suite of 28 perception sensors, aimed at enhancing overall driving safety. According to the National Highway Traf...
    LG Energy Solution advances lithium-ion technology with new electrolyte development
    LG Energy Solution, in collaboration with Pohang University of Science and Technology (POSTECH) and Sungkyunkwan University, has developed a significant electrolyte technology that enhances both the low-temperature performance and thermal safety of lithium-ion batteries. Announced Oct. 20, this new electrolyte technology can maintain about 87% capacity after 100 cycles in -20°C conditions, which is a marked improvement over existing electrolytes. Additionally, the technology successfully suppre...
    Nio rolls out new OTA update in Europe to improve charging and navigation
    Nio has announced a new over-the-air software update, Banyan 2.4.2, for its European customers that enhances various features, including charging, navigation, and the in-car voice assistant known as 'NOMI.' Vehicles in Europe continue to operate on the Banyan operating system, which supports Nio's NT2.0 platform, even as most of Nio's models in mainland China use the more recent Cedar system. This update, designed specifically for the European market, includes more than 10 upgrades and signifies...
    Infineon unveils first gallium nitride transistor family for automotive applications
    Infineon Technologies unveiled its first gallium nitride (GaN) transistor family qualified to the Automotive Electronics Council (AEC) standard for automotive applications. The company has begun supplying samples of the CoolGaN Automotive Transistor 100 V G1 family, which adheres to AEC-Q101 standards and includes high-voltage CoolGaN Automotive Transistors and bidirectional switches. These innovations cater to the increasing demand for efficient power conversion solutions in automotive fe...
    Toshiba launches 24V SCiB battery pack for automotive, marine and heavy equipment sectors
    Toshiba has launched a new SCiB™ 24V battery pack (P25H20-3) designed for use in the automotive, marine and heavy equipment sectors. This lithium-ion battery pack can seamlessly replace conventional lead-acid batteries. While lead-acid batteries are widely used for their low-cost and high current output, the demand for lithium-ion alternatives is increasing due to their lighter weight, greater efficiency, longer service life and reduced environmental impact. The SCiB™ 24V battery pack ...
    ChargePoint plans to launch 10-minute EV charging solution by 2026
    ChargePoint plans to introduce a 10-minute electric vehicle charging solution by 2026, CEO and President Rick Wilmer said, according to an Oct. 13 report by USA Today. The network is collaborating with Eaton to enhance charging efficiency by connecting chargers to direct current grids. ChargePoint's new DC fast-charging system represents a significant advancement, featuring 600-kW charging stations that are both more efficient and cost-effective. These stations are set to reduce bot...
    India-based RISE develops sodium-ion battery that charges in five minutes
    Scientists at the Research Institute for Sustainable Energy (RISE) under TCG-CREST have developed a sodium-ion battery that can charge to 94% capacity in five minutes without using cobalt, nickel, copper or lithium. Led by Abhik Banerjee, the research team includes Sreeroop Ghosh, Sayan Chatterjee and Abhijit Garai. The battery employs pouch-cell technology with energy densities of 180 Wh/kg (gravimetric) and 550 Wh/L (volumetric), providing 10-kW peak power and maintaining 97% capacity over ...
    Hyundai to launch India's first AAOS-based infotainment system in Q1 2027
    Hyundai Motor India plans to introduce India's first Android Automotive OS (AAOS)-based infotainment system in the first quarter of 2027, starting with an A-segment hatchback and a sport utility vehicle, before expanding it across its entire range. This move is part of Hyundai's "Dynamic User Experience" strategy, aiming to transform its vehicles into connected, app-enabled spaces akin to smartphones, with features such as over-the-air (OTA) updates. Unlike Android Auto, which mirrors a smart...
    SES AI joins Hisun New Energy Materials for electrolyte production venture
    SES AI Corp., recognized for its AI-enhanced high-performance lithium-metal (Li-metal) and lithium-ion (Li-ion) batteries, has announced the signing of a term sheet for a joint venture with Hisun New Energy Materials Ltd. Co., a Texas-based electrolyte contract manufacturer. This venture will aim to commercially supply electrolyte materials discovered by SES AI's Molecular Universe. SES AI will hold a 90% stake in the JV, pending the execution of a definitive agreement expected by the end of Oct...
    Sunrise New Energy awarded US patent for innovative lithium-ion anode material
    Sunrise New Energy Co. Ltd. has announced that its subsidiary, Sunrise (Guizhou) New Energy Material Co. Ltd., has been awarded a US patent for a pioneering preparation method of an anode material for lithium-ion batteries. This development highlights the company's ongoing innovation in high-performance lithium-ion battery anode materials. The patented method enhances the initial Coulombic efficiency and power performance of graphite composites, marking a significant advancement for next-gene...
    Keysight unveils AE6980T optical automotive Ethernet test solution at IEEE event in France
    Keysight Technologies has introduced the AE6980T nGBASE-AU Optical Automotive Ethernet Transmitter Test Solution, the first platform designed to qualify next-generation optical automotive Ethernet PHYs that align with the IEEE 802.3cz standard. This unveiling took place at the 2025 IEEE SA Ethernet & IP at Automotive Technology Day held in Toulouse, France. The IEEE 802.3cz standard pertains to multigigabit optical automotive Ethernet ranging from 2.5 G to 50 G over multimode fiber, offering...
    Polestar launches telematics entity for EV fleet customers
    Polestar has announced the launch of Polestar Fleet Telematics, a new service aimed at revolutionizing the management, monitoring and optimization of electric vehicle fleets. This service offers real-time data and actionable insights, and integrates seamlessly with leading fleet management platforms without necessitating additional hardware or installation fees. Polestar Fleet Telematics was developed in partnership with Echoes, Geotab and High Mobility, providing fleet operators with to...
    Mercedes-Benz subsidiary Star Assembly begin production of electric drive units
    Star Assembly, a wholly-owned, Romania-based subsidiary of Mercedes-Benz AG, has expanded its production portfolio by beginning the assembly operations of electric drive units (EDUs) for the fully electric Mercedes-Benz GLC. This development enhances the strategic role of the Sebeș, Romania-based manufacturing plant within the Mercedes-Benz global production network. The Sebeș facility is now the second plant in the parent company's network to supply EDUs to Mercedes-Benz vehic...
    Japan Mobility Show 2025: Toyota Boshoku to showcase future mobility concepts
    Toyota Boshoku Corp. will participate in the Japan Mobility Show 2025, scheduled to take place at Tokyo Big Sight in Tokyo from Oct. 30 to Nov. 9. The Japanese supplier will present its vision for future mobility spaces through innovative concepts that emphasize comfort, functionality and emotional value. The company will showcase its Next-Generation Mobility Space Mock-up, I.C.30 -Integrated Cabin 2030-, displaying its focus on safety and environmental sustainability. This exhibit includes i...
    Forvia Hella readies for launching FlatLight technology for front-lighting applications
    After the successful debut of its FlatLight technology in rear lighting in 2024, Forvia Hella is now gearing up for the market launch of this innovative technology for use in daytime running lights (DRLs). Forvia Hella is carrying out development of the FlatLight modules at its headquarters in Lippstadt, Germany, with customer-specific applications being developed at its plants in Ljubljana, Slovenia; Mohelnice, Czech Republic; and Ostrava, Czech Republic. The company already has customer p...
    Silence opens its first battery swap stations in France
    Silence, ACCIONA's electric vehicle brand, launched its initial 14 battery swap stations in Paris and the surrounding metropolitan area. The company plans further expansion across the French Riviera, covering cities like Nice and Cannes, by the end of the year. Silence's strategy in France parallels its successful model in Spain, where it has established over 160 battery swap stations. These stations enable users to swiftly exchange depleted batteries for fully charged ones in just 30 seconds...
    Adient and Autoliv introduce safety solution for zero-gravity car seats
    Seating supplier Adient and safety system expert Autoliv have jointly developed innovative safety solutions that significantly enhance occupant protection in zero-gravity seats that offer higher recline than conventional seats. Zero-gravity seats, which allow occupants to recline their seat back up to 130° or more, are becoming hugely popular in mid- and large-size sport utility vehicles, especially in mainland China. As automotive industry trends move toward electrification and smart techno...
    Toyota North America to debut overhauled multimedia system in new RAV4
    Toyota has announced the launch of an enhanced Toyota Audio Multimedia system, which will first appear in the 2026 RAV4, before extending to other models. The system reflects a collaboration between Toyota Motor North America, Toyota Connected North America, and Woven by Toyota, incorporating customer and dealer feedback for continued improvement via over-the-air updates. Key advancements include the integration of 5G network connectivity powered by AT&T, maintaining the platform architectur...
    DENSO launches innovative products to enhance EV efficiency
    DENSO has announced the development of new electrification products aimed at improving energy efficiency, driving performance and reducing charging times for electric vehicles. These innovations are designed to enhance the practicality of EVs and include an inverter to be featured in the new e-axle from BluE Nexus Corp., as well as a cell supervising circuit for measuring battery voltage and temperature, and a shunt current sensor for measuring current. These products will specifically be instal...
    Ooono introduces 'no-distraction' speed camera alert system to fleet sector
    The Co-Driver No2 alert system, developed by Danish firm Ooono, is now available to UK fleets. It provides a "no-distraction" method to warn drivers of road hazards, police presence and safety cameras. The device, which was already popular across continental Europe, aims to enhance road safety in the UK by allowing drivers to share traffic information with just a single click, eliminating the need for touchscreen interaction. This is particularly relevant given a study by Transport Research...
    Arcfox’s first extended-range electric vehicle with CATL battery slated for launch in October
    Arcfox has announced that its first extended-range electric vehicle (EREV), the Alpha T5 Extended Range Edition, will be launched in late October. This midsize sport utility vehicle is equipped with CATL Freevoy batteries and the BAIC Shenqing extended-range power system. The upcoming EREV will also be powered by a 1.5-liter (L) engine used as a range extender, offering 40% thermal efficiency and achieving a fuel consumption rate of 5.18L/100km in extended range mode. The vehicle has a p...
    Zeekr launches updated 001 with ultrafast charging, improved powertrain
    Mainland Chinese electric-vehicle maker Zeekr has officially launched the updated Zeekr 001 shooting brake, showcasing significant specification upgrades while maintaining its exterior design. The updated model features an official starting price of 269,800 yuan (about $37,826), up from the predecessor's 259,000 yuan. With a limited-time trade-in subsidy of 10,000 yuan, the effective starting price becomes 259,800 yuan. The 2026 Zeekr 001 is developed on a 900-V high-voltage architecture, ...
    Sumitomo and Toyota collaborate to develop cathode material for all-solid-state battery
    Sumitomo Metal Mining Co. Ltd. and Toyota Motor Corp. have signed a joint development agreement to mass-produce cathode materials for all-solid-state batteries intended for battery-electric vehicles (BEVs). The collaboration aims to advance the development of these next-generation batteries, which promise advantages such as smaller size, higher output and longer lifespan compared to traditional liquid-based batteries. The anticipated benefits of all-solid-state batteries in BEVs include exten...
    Mercedes-Benz unveils ELF experimental charging vehicle showcasing advanced EV charging tech
    Mercedes-Benz is advancing its experimental charging vehicle, ELF, combining vehicle innovations with infrastructure for a seamless and intelligent charging experience. ELF, short for Experimental-Lade-Fahrzeug, embodies a novel approach to electric mobility, emphasizing local CO2-free driving, intelligent charging and resource conservation. Mercedes-Benz is focused on developing sustainable charging solutions for various environments, having previously launched the Plug & Charge function...
    Ferrari announces details of its first all-electric car Elettrica
    Ferrari unveiled its first all-electric car, the Ferrari Elettrica, during Capital Markets Day 2025. This marks a significant milestone in Ferrari's multi-energy strategy, which includes internal combustion engines (ICEs), hybrid electric vehicle (HEV) and plug-in hybrid electric vehicle powertrains, and now fully electric drive. The Ferrari Elettrica combines advanced technology and performance while maintaining Ferrari's traditional engineering and craftsmanship. The chassis and bodysh...
    Volvo Cars to debut multi-adaptive safety belt in the all new EX60 electric SUV
    Volvo Cars will debut its all-new multi-adaptive safety belt in the fully electric EX60 sport utility vehicle, which is scheduled to be launched in January 2026. The multi-adaptive safety belt is designed to provide enhanced protection by adjusting to both traffic conditions and the individual wearing it, utilizing real-time data from advanced sensors to tailor protection based on factors such as height, weight, body shape and seating position. This system demonstrates how Volvo Cars employs rea...
    Ams OSRAM launches OSIRE E3030 RGB LED for use in vehicle interiors
    Ams OSRAM has developed the OSIRE E3030, a new RGB LED for automotive interior applications, offering superior light output and precise controllable color variety. The new solution is designed to enhance both function and aesthetics in vehicle design with a light output in the 0.5-W range. The OSIRE E3030 is robust, resistant to vibration and temperature changes, and meets established automotive standards. The LED is particularly suitable for applications where light serves as a communication...
    BWI Group to supply MagneRide semi-active suspension technology to all-new Polestar 5 electric sedan
    BWI Group has announced that its MagneRide semi-active suspension technology will be featured in the all-new Polestar 5 all-electric sedan. This advanced suspension technology will be supplied across both Performance and Dual motor variants of the Polestar 5, addressing the growing dynamics challenge of heavier electric vehicles and offering original equipment manufacturers a proven, software-driven solution. Alongside the high-performance version, BWI Group will also provide a sophisticated pas...
    Chinese Academy of Sciences announces breakthrough in solid-state lithium batteries
    The Chinese Academy of Sciences (CAS) announced the invention of a flexible battery featuring a stable current level and high-energy density. This significant breakthrough in the field of solid-state lithium batteries, driven by polymer molecules, is yet to be applied in mass production. Solid-state batteries, seen as crucial to the future of electric mobility, promise higher battery capacity while eliminating the risks associated with electrolyte leakages. Despite their potential, manufactur...
    STMicroelectronics unveils L98GD8 driver for 48-V automotive systems with advanced features
    STMicroelectronics has introduced the L98GD8 driver, designed for 48-V automotive power systems, featuring eight configurable channels for driving metal-oxide-semiconductor field-effect transistors (MOSFETs) in various configurations. This driver can operate from a 58-V supply, offering diagnostics and protection to enhance safety and reliability. The 48-V powernet is beneficial for car manufacturers aiming to improve mild-hybrid systems by supporting integrated starter-generators (ISGs), enhanc...
    Sumitomo Riko adopts Ansys' AI to enhance automotive component design and manufacturing
    Sumitomo Riko is integrating Ansys' AI technology to enhance efficiency in the design and manufacturing of automotive components. SimAI, which analyzes both new and legacy simulation data, is being used to create AI models that can quickly predict performance. The deployment of SimAI helps Sumitomo Riko accelerate complex computational tasks such as anti-vibration design, battery cooling, magnetic field analysis and mixing heat transfer analysis. As a global manufacturer of high-per...
    Diodes introduces PI7C9X762Q automotive-compliant UART bridge for EV design
    Diodes Inc. has introduced the PI7C9X762Q, a high-performance automotive-compliant inter-integrated circuit/serial peripheral interface (I2C/SPI-bus-to-dual-channel) universal asynchronous receiver-transmitter (UART) bridge, designed to meet the needs of electric vehicle designs. The device is particularly suitable for smart cockpits, central controllers, input/output (I/O) module controllers, advanced driver assistance systems, telematics and zonal gateways due to its low-po...
    Toyota Motor, Sumitomo Metal Mining partner for joint production of cathode materials for solid-state batteries
    Toyota Motor and Sumitomo Metal Mining have entered into a joint development agreement to mass-produce cathode materials for all-solid-state batteries intended for battery-electric vehicles (BEVs). These next-generation batteries, which include components such as a cathode, anode and solid electrolyte, promise advantages including reduced size, increased output and extended lifespan over current liquid-based batteries. BEVs equipped with these batteries could benefit from longer driving ran...
    Pirelli launches high-performance Cinturato Winter 3 tire for sedans and crossovers
    Pirelli has introduced the Cinturato Winter 3, a high-performance winter tire for sedans and crossovers that ensures safety and control in winter conditions. Tested by Dekra and TÜV, the new tire excels in snow for braking, traction and handling, earning the TÜV Premium Quality Mark. The Cinturato Winter 3 also performs well on wet surfaces, leading in aquaplaning resistance and handling, achieving an A-B classification on the European label for wet grip. The tire reduces rolling noise as c...
    SES AI launches molecular universe 1.0 for accelerated battery material discovery
    SES AI Corp. has announced its latest advancement in the battery industry with the introduction of Molecular Universe 1.0 (MU-1), a comprehensive battery material discovery software platform, at The Battery Show — North America. This platform, set to launch Oct. 20, enhances SES AI's initiatives in global materials and cell supply chains by accelerating battery material discovery. MU-1 facilitates literature research, molecule search, formulation search and cell performance prediction,...
    Omnivision unveils next-gen automotive image sensor OX08D20 with TheiaCel technology
    Omnivision has announced the launch of its latest automotive image sensor, the OX08D20 8-megapixel complementary metal-oxide-semiconductor (CMOS) image sensor with TheiaCel technology. This new sensor is an upgrade to the previously popular OX08D10, designed for exterior cameras in advanced driver assistance systems and autonomous driving (AD). The device will make its debut at AutoSens Europe, held in Barcelona, Spain, from Oct. 7–9, where Omnivision is the lead sponsor. Paul Wu, director ...
    Omnivision unveils 5-MP sensor for in-cabin monitoring with Nyxel technology
    Omnivision has introduced the OX05C, the first 5-megapixel (MP) back-side illuminated global shutter high-dynamic range sensor designed for in-cabin driver and occupant monitoring systems. This new sensor, part of its Nyxel near-infrared technology family, will be demonstrated at AutoSens Europe in Barcelona, Spain. The OX05C offers high-quality imaging with a pixel size of 2.2 micrometers (µm) and utilizes Nyxel technology for enhanced low-light performance at the 940-nanometer near in...
    TDK launches software that combines GNSS and INS for enhanced positioning accuracy
    TDK Corp. has introduced Trusted Positioning DRIVE software designed to enhance positioning accuracy in environments where satellite signal reception is limited or unavailable. The software combines global navigation satellite system (GNSS) data with inertial navigation system (INS) measurements to achieve centimeter to decimeter accuracy in advanced driver-assist systems, robotic platforms and off-road vehicles. The software processes data from GNSS receivers and inertial measurement units...
    Battery Show North America 2025: Aisin showcases advanced solutions for electric and hybrid vehicles
    Aisin Corp., a leading tier 1 automotive supplier, is presenting its latest advancements in electric and hybrid technologies at The Battery Show North America and Electric & Hybrid Vehicle Technology Expo. Aisin's exhibit at the event features products and technologies that focus on power management, energy efficiency and aerodynamics, all designed to enhance fuel efficiency, reduce weight, minimize air resistance and optimize energy consumption in electric and hybrid vehicles. Highl...
    Battery Show North America 2025: Wacker Chemical showcases advanced adhesives for evolving EV battery designs
    At the Battery Show North America 2025, being held in Detroit from Oct. 6 to 9, Wacker Chemical Corp. (WCC) is showcasing its advanced thermally conductive adhesives, emphasizing its commitment to innovation in electric vehicle battery technology. As the EV industry transitions from cell-to-module (CTM) to cell-to-pack (CTP) and cell-to-chassis (CTC) designs, there is increased demand for adhesives that ensure both thermal management and structural integrity. Wacker's thermal adhesives are pa...
    Battery Show North America 2025: Zapi Group unveils advanced onboard chargers for EVs
    Zapi Group is showcasing its latest high-voltage capabilities at The Battery Show North America 2025 in Detroit from Oct. 6–9. The company will introduce advanced charging solutions aimed at meeting the demands of original equipment manufacturers and the evolving electrification market. Among the innovations are new liquid-cooled 7.2-kW and 22-kW onboard chargers designed for 400-V and 800-V battery packs, with system fit and interoperability testing samples becoming available soon. Sara...
    Nexteer Automotive launches advanced Direct Drive Hand Wheel Actuator in steer-by-wire technology
    Nexteer Automotive has introduced its Direct Drive Hand Wheel Actuator (DD-HWA), a significant advancement in steer-by-wire (SBW) technology. The US-based supplier said its new solution sets a new standard for steering feel and system integration, providing automotive original equipment manufacturers with increased packaging and design flexibility. The innovation is expected to enhance driving experiences in software-defined vehicles (SDVs), as well as assist and automated driving across various...
    Car IQ introduces feature to bypass high-cost fueling stations
    Vehicle-based payment services provider Car IQ has introduced Station Controls, a new capability within its Car IQ Pay platform that provides fleets with real-time visibility and control over fuel expenses. The feature automatically blocks high-cost stations and directs drivers to more affordable fueling options nearby. Car IQ’s analysis of hundreds of thousands of fleet transactions found that drivers choose higher-priced fuel stations nearly 20% of the time, adding up to 36 cents per ga...
    Ioncor unveils high-density battery concept named Energy Pack Long
    Ioncor, a leading European supplier of battery systems for electric vehicles and other applications, has introduced Energy Pack Long, a flexible and high-density battery system designed for the electrification of buses. This system aims to enhance the speed, reliability and cost-effectiveness of electrifying buses, addressing both operational and economic needs of bus manufacturers and operators. Energy Pack Long supports the transition to zero-emission transport, aligning with publ...
    TE Connectivity launches new electronic control unit connector portfolio for software-defined vehicles
    TE Connectivity (TE) has launched its Inside Device Connectivity portfolio to address the evolving requirements of automotive electronic control units (ECUs) and next-generation vehicle architectures, including software-defined vehicles (SDVs). The new lineup includes board-to-board, wire-to-board, flex-to-board and wire-to-wire connector solutions engineered for compact, high-performance applications within zonal architectures and key systems such as: Onboard charger (OBC), inverter...
    Forward Thinking Systems adds vehicle health monitoring feature to IntelliHub platform
    Forward Thinking Systems, a provider of fleet management technology, has launched a new Vehicle Health feature on its IntelliHub platform. This feature aims to assist fleet managers in monitoring vehicle conditions, anticipating maintenance needs and ensuring safety compliance efficiently. The Vehicle Health integration combines real-time diagnostic trouble code (DTC) monitoring with automated recall tracking in an intuitive interface, allowing fleet managers to identify issues without navigatin...
    RWTH Aachen University develops an innovative melt-coating process for the production of ultrathin lithium metal anodes
    The Chair of Production Engineering of E-Mobility Components (PEM) at RWTH Aachen University is working on a revolutionary melt-coating process as part of the EXIST research transfer project LIMA for producing ultrathin lithium metal anodes. This innovative method contrasts with existing costly techniques that face limitations in layer thickness and scalability. It facilitates the cost-effective, industrial production of lithium foils with enhanced electrochemical characteristics. The process...
    Siemens launches SICHARGE FLEX megawatt charging system
    Siemens has launched the SICHARGE FLEX product family, a next-generation electric vehicle distributed charging system. The megawatt charging system is designed to be flexible, reliable and economical, adapting to various use cases such as fleet and depot or en route charging. Officially launched at Busworld 2025 in Brussels, the product will be available for purchase in 2026. SICHARGE FLEX emphasizes modularity, scalability and adaptability, featuring a pioneering dynamic power distri...
    Sony Semiconductor announces IMX775 CMOS camera sensor for advanced in-cabin automotive monitoring
    Sony Semiconductor Solutions announced the upcoming release of the IMX775 CMOS RGB-IR image sensor, featuring the smallest pixel size of 2.1 micron (µm). This sensor combines RGB and infrared (IR) imaging on a single chip, offering a resolution of approximately 5 effective megapixels, designed specifically for in-cabin monitoring cameras. This development comes amid increasing demands for advanced safety performance in automobiles, with laws mandating the monitoring of driver status and passeng...
    Nio issues software update to improve ET9’s assisted driving system
    Nio has rolled out a new software update for its flagship ET9 sedan, enhancing the smart cockpit and assisted driving system. The update, known as Cedar 1.3.0, is the fifth iteration of Nio's intelligent system, succeeding the Banyan system. The ET9, launched in December 2024 with deliveries starting in March 2025, recently saw the release of its Horizon Edition, featuring exclusive design elements, unveiled by CEO William Li at an annual event on Sept. 20, 2025. This update, part of a mode...
    Tobii and STMicroelectronics launch mass production of advanced in-cabin sensing technology
    Tobii and STMicroelectronics have commenced mass production of an advanced interior sensing system for a premium European carmaker, enhancing driver and passenger monitoring. This cost-effective solution uses a single camera that integrates Tobii's interior-sensing technology with STMicroelectronics' imaging sensors, offering high-quality imaging both in daytime and nighttime environments. Adrian Capata,  senior vice president of Tobii Autosense, highlighted the collaboration with STMi...
    Porsche unveils China-focused infotainment system
    Porsche has unveiled its next-generation in-car infotainment system at the 2025 World New Energy Vehicle Congress (WNEVC) in Haikou, Hainan province. This debut highlights Porsche's commitment to its "in China, for China" strategy. Alexander Pollich, president and CEO of Porsche China, emphasized that the system is specifically tailored for mainland Chinese users, marking a significant milestone in its strategy. This launch also represents Porsche's first participation at the WNEVC, in collab...
    ROHM unveils new smart switches optimized for zonal controllers
    ROHM has introduced a new series of high-side smart switches, known as Intelligent Power Devices (IPDs), with advanced current-sensing capabilities and ON resistances ranging from 9 milliohm to 180 milliohm. These switches are designed to protect loads and subsystems from issues such as overcurrent, overvoltage and overtemperature, ensuring the reliable operation and protection of sensitive automotive components such as lighting, door locks and power windows. They also offer enhanced safety feat...
    Adient unveils Pure Ergonomics concept to enhance vehicle seating comfort and sustainability
    Adient has unveiled its Pure Ergonomics seating concept, which aims to enhance ergonomics and space in vehicle interiors, benefiting all passengers, including those beyond the front row. This concept includes a new front seat design inspired by Adient's Autonomous Elegance demonstrator from 2023, specifically for the premium vehicle segment. It provides up to 60 millimeters (mm) of added space in the foot and knee area of the second row, offering roominess typically found in higher-end segments....
    Freudenberg Sealing Technologies to unveil battery innovations at 2025 Battery Show North America
    Freudenberg Sealing Technologies (FST) is set to showcase its latest innovations at the 2025 Battery Show North America in Detroit. FST's display will feature three key innovations: New battery pressure equalization components, advanced sealing for battery systems and advanced thermal management for high-performance electric vehicles. Freudenberg has expanded its DIAvent product portfolio, which addresses the need for effective pressure equalization in the transition to electrification. ...
    Kia America to launch Plug & Charge technology for streamlined EV charging
    Kia America has announced the upcoming launch of its Plug & Charge technology, designed to streamline the electric vehicle charging experience for drivers. This feature will be available on the 2026 EV9 and 2025 EV6 models, enabling automatic start of charging sessions and payment processing through the Kia Charge Pass. Set to expand the charging experience, this technology seamlessly integrates into Kia's connected vehicle platform, allowing automatic vehicle authentication and billing a...
    Mercedes-Benz partners with Momenta to launch AI-driven driver assistance system in China
    Mercedes-Benz and Momenta have announced the upcoming launch of a new intelligent driver assistance system based on Momenta's Flywheel Big Model. This system is set to debut this fall on the locally produced electric CLA and will offer driver assistance across highways, urban roads and parking. The intention is to equip more Mercedes-Benz models with this technology in the future, as part of its intelligent driving strategy. Mercedes-Benz has been collaborating with Momenta since 2017 and aim...
    Australian energy company AGL launches vehicle-to-grid initiative
    AGL has announced the launch of a significant residential vehicle-to-grid (V2G) trial to help electric vehicle owners transform their cars into flexible home energy storage assets. The trial focuses on models from Hyundai, Kia, BYD and Zeekr, ensuring participants' vehicle battery warranties remain unaffected. With 300,000 EVs on the road, the trial aims to demonstrate the potential of using EVs as energy sources that can reduce home energy costs and bolster the energy grid as more renewable ...
    24M Technologies unveils ETOP system to enhance EV battery performance and flexibility
    24M Technologies has introduced the 24M electrode-to-pack (ETOP) system, designed to enhance energy density and potentially extend the driving range of electric vehicles by up to 50%. This innovative battery packing system integrates sealed, energy-storing electrodes directly into the battery pack, eliminating the traditional cells and modules that often occupy space and materials inefficiently. The ETOP system replaces inactive components in traditional lithium-ion packs with sealed ele...
    Voltpost launches advanced lamppost EV charger Voltpost Air
    Voltpost has introduced Voltpost Air, an advanced lamppost electric vehicle charger aimed at expanding access to curbside and parking lot charging. This next-generation Level 2 charging platform is designed to be broadly compatible, allowing for rapid installation and reliable operation. It offers flexibility for site hosts to install one or two chargers on wooden and metal lampposts, as well as utility poles. The first public deployment of Voltpost Air is taking place in Brooklyn, New York, ...
    Littelfuse launches high-voltage cartridge fuses for next-gen automotive electronics
    Littelfuse has introduced its 828 and 827 Series high-voltage cartridge fuses, which are compliant with AEC-Q200 standards. These fuses are designed for next-generation automotive electronics, with the 828 Series rated at 1,000 VDC and the 827 Series at 800 VDC. They provide a compact and reliable solution for circuit protection in electric vehicle systems, offering a 10-kiloampere (kA) interrupting rating, a wide operating temperature range from -55°C to 125°C, and various mounting configurat...
    Wayve unveils Gen 3 robot platform powered by NVIDIA DRIVE AGX Thor for autonomous driving
    Wayve has announced the development of its Gen 3 robot platform, which will utilize NVIDIA DRIVE AGX Thor, an advanced automotive-grade AI computer. This new platform represents the next step for Wayve's global development fleet, supporting the advancement of its AI Driver software into more secure, capable and scalable automated driving systems. The Gen 3 platform aims to progress self-driving technology to Level 3 and Level 4, necessitating a flexible and powerful computing capability to ma...
    SK Keyfoundry unveils advanced multilevel thick IMD process for capacitors
    SK Keyfoundry, a South Korean 8-inch pure-play foundry, has unveiled its multilevel thick intermetal dielectric (IMD) process for capacitors, boasting high breakdown voltage characteristics. These characteristics contribute to enhanced safety, reliability and lifespan while improving the noise immunity of semiconductor devices. The process facilitates the stacking of up to three IMD layers, achieving a total thickness of up to 18 micrometers (μm) in a metal-insulator-me...
    Volvo EX90 to receive significant upgrades for 2026 with enhanced safety and charging
    Volvo Cars has announced significant hardware and software upgrades to its EX90 model, including enhanced safety features and increased electrical capacity for the 2026 model year (MY) cars. The electric sport utility vehicle will benefit from an additional NVIDIA Drive AGX Orin processor, replacing the older NVIDIA Xavier chip, increasing its computational power to 500 trillion operations per second. This upgrade enables advanced safety capabilities through the car's lidar sensor, including ...
    Pilotfish unveils dual-communication gateway for smarter public transport
    Pilotfish Networks AB has introduced the VG212 Vehicle Gateway, an enhanced system designed to improve vehicle-to-backoffice connectivity for public transport fleets. The VG212 features redundant 4G and possible 5G connectivity alongside advanced positioning capabilities using the global navigation satellite system (GNSS) and dead reckoning. These advancements aim to create reliable, scalable and future-ready digital environments for public transit systems. At the core of the VG212 is a red...
    Tellus Power Globe unveils new 600-kW DC fast-charger systems for corporate fleets
    Tellus Power Globe Holding Ltd. has unveiled two new 600-kW DC fast-charger systems: A distributed system and an all-in-one unit, aimed at enhancing the performance and return on investment (ROI) for corporate fleets and electric vehicle charging network operators. These chargers support NACS, CCS1 and CCS2 standards, and are available in both all-in-one and distributed configurations, offering high-powered, flexible charging solutions for fleets, depots and network operators. The California-...
    Nissan unveils ProPILOT featuring AI in Ariya prototypes for urban navigation in Tokyo
    Nissan has begun demonstrations of its next-generation ProPILOT advanced driver-assist technology with a fleet of all-electric Nissan Ariya-based prototype vehicles, showcasing their ability to navigate the complex urban environment of central Tokyo. This technology, set to be launched in Japan during fiscal year 2027, combines Wayve's AI Driver software and Nissan's Ground Truth Perception technology, which uses next-generation lidar. The vehicles are equipped with 11 cameras, five radar s...
    Sinbon Electronics to debut at The Battery Show North America 2025 in Detroit
    Sinbon Electronics Co. Ltd., an electronics system integrator from Taiwan, is set to make its debut at The Battery Show North America 2025, showcasing its latest innovations under the theme Plug-and-Play Revolution, Reliable Charging Systems for a Connected World. The company will highlight advanced thermal management and high-power charging solutions aimed at enhancing performance, energy efficiency and compatibility within the electric vehicle sector. Sinbon has significantly expanded its p...
    Nio plans trial operations for fifth-generation battery-swap stations by late 2025
    Shanghai-based electric carmaker Nio Inc. plans to commence trial operations of its fifth-generation battery swap stations by the end of 2025. The full deployment is scheduled for 2026. These new stations will have a 20% increase in capacity compared to the previous generation. Nio's Co-Founder and President Qin Lihong announced this during a media roundtable in Hangzhou, Zhejiang, on Sept. 21. The trial sites are expected to begin operations by December 2025. At the Nio Day 2025 event ...
    Nexteer will present latest Motion-by-Wire technologies at MOVE America
    Nexteer Automotive will showcase its latest Motion-by-Wire technologies, including steer-by-wire, rear-wheel steering, brake-by-wire, and the MotionIQ Software Suite at the MOVE America event on Sept. 24–25 in Detroit, US. At its booth, Nexteer’s experts will explain how these innovations are shaping the future of software-defined chassis for passenger vehicles, helping original equipment manufacturers speed up development, reduce costs and enhance driving experiences. Visitors can t...
    IAA Mobility 2025: Key vehicle human-machine interface (HMI) trends
    The automotive industry is seeing a paradigm shift where software is the defining factor for innovation and user experience. At the recently concluded biennial event IAA Mobility 2025 in Munich (Germany), there was an unmistakable focus on blending the driver’s physical and digital worlds as industry stakeholders converged to showcase technologies and innovations to enhance the entire mobility journey, making vehicles more integrated into the broader digital ecosystem. Multimodal inter...
    Hyundai Steel starts production of third-generation automotive steel plates
    Hyundai Steel has commenced commercial production of its third-generation steel plates for automobiles after a decade of research. These innovative steel plates, produced at the Dangjin Steelworks, aim to capture the global automaker market by offering a superior balance of strength and formability. The company modified existing facilities to support production and is testing these plates with major customers, including Hyundai Motor Group. The third-generation steel plates boast increased te...
    Stellantis unveils EV prototype with revolutionary integrated battery system
    Stellantis revealed a prototype for an electric vehicle equipped with a faster charging, lighter and more affordable battery, eliminating the need for separate inverter and charger components. Developed in collaboration with TotalEnergies subsidiary Saft, the intelligent battery integrated system (IBIS) offers significant weight and space savings, enhancing serviceability. This system is 10% more efficient and reduces charging time by one hour compared to EVs with similar-sized batteries...
    Nexperia unveils 100-V MOSFETs for efficient 48-V automotive applications
    Nexperia has introduced new 100-V metal-oxide-semiconductor field-effect transistors (MOSFETs), qualified for AEC-Q101 standards and housed in compact CCPAK1212 (12 mm x 12 mm) copper-clip packaging. These MOSFETs offer ultralow conduction losses with an on-resistance as low as 0.99 milliohm and support safe current levels exceeding 460 amperes. They are particularly suitable for thermally demanding 48-V automotive applications, such as onboard chargers, traction inverters and battery manag...
    STMicroelectronics launches compact, cost-effective power-management integrated circuit for automotive applications
    STMicroelectronics has introduced SPSA068, a compact and cost-effective power-management integrated circuit (PMIC) designed specifically for automotive applications. This PMIC supports ISO 26262 functional safety up to ASIL-B and is qualified to AEC-Q100. It is intended for use with microcontrollers (MCUs) that operate from a single-supply voltage and features a comprehensive suite of components needed for MCU power management. These include a 1A battery-compatible buck voltage regulat...
    Ams OSRAM introduces reliable capacitive sensor for automotive environments
    Ams OSRAM has introduced its AS8580 automotive capacitive sensor with a robust capacitive sensing approach based on IQ demodulation. This technology allows for separating the measured capacitance into parasitic resistive and capacitive parts, enhancing resilience against environmental disturbances and maintaining high sensitivity, making it suitable for both exterior and interior automotive applications. The AS8580 features a sensitivity of 1.9 fF/LSB, enabling accurate detection of touc...
    Panasonic developing groundbreaking battery tech to boost EV range
    Japanese company Panasonic is planning to develop a new type of higher-capacity battery in about two years, aiming to enhance the driving range of electric vehicles significantly for Tesla, one of its key clients. By eliminating the anode during the manufacturing process, Panasonic seeks to increase energy density, potentially achieving a world-leading capacity level by the end of 2027. The proposed improvement could result in a 25% increase in battery capacity, potentially extending the driv...
    Scania launches new combustion and plug-in hybrid powertrains for buses
    Scania has introduced a new powertrain platform designed to cater to the varying needs and requirements of bus and coach operators, amid changing political and technological landscapes driven by carbon emission regulations and local sustainability laws. The platform features two configurations: An internal combustion engine (ICE) and a plug-in hybrid electric vehicle, allowing long-distance operators to choose solutions that align with their specific challenges and prerequisites. The Scani...
    Ecarx unveils Geely Galaxy M9 featuring advanced AI technologies and rapid presale success
    Ecarx Holdings Inc. has announced the launch of the Geely Galaxy M9, which utilizes its Pikes computing platform and Cloudpeak cross-domain software stack to provide an advanced AI cockpit experience. The Galaxy M9 received over 40,000 orders within 24 hours of its presales starting Aug. 23, indicating a significant demand for this flagship model. The vehicle is powered by the 5-nanometer Qualcomm Snapdragon SA8295P automotive-grade system-on-chip (SoC), enabling advanced gra...
    Abu Dhabi launches pilot for AI-driven autonomous delivery vehicles
    The Integrated Transport Centre (ITC), affiliated with the Department of Municipalities and Transport, has launched Abu Dhabi, United Arab Emirates' first pilot program for autonomous delivery vehicles, according to a report published by Gulf News on Sept. 16. This project, undertaken in collaboration with K2 and EMX, the logistics arm of 7X, operates under the oversight of the Smart and Autonomous Systems Council (SASC). A significant milestone of this initiative is the issuance of the Emi...
    Minieye launches Xiaozhu unmanned vehicles in Shenzhen for logistics solutions
    Minieye has officially launched its unmanned logistics brand, Xiaozhu Unmanned Vehicle, in Shenzhen, mainland China, featuring a new lineup of driverless delivery vehicles. The first model, Xiaozhu T5, offers a cargo volume of 5.5 cubic meters, a payload of 1,000 kg, and a range of 180 km, designed for last-mile delivery tasks such as parcel distribution and supermarket deliveries. The Xiaozhu T8 model provides 8.5 cubic meters of cargo space, a 1,700-kg payload, and a range of up to 240 km...
    RideFlux to launch autonomous bus service in Busan's Osiria Tourist Complex
    RideFlux, an autonomous software startup, announced that it would launch an autonomous public transportation bus service at the Osiria Tourist Complex in Busan, South Korea. This marks the first occurrence of a fully open self-driving bus service in Busan that is accessible to ordinary citizens. The project will feature a total of four 9-meter electric buses, referred to as BIG AI, each accommodating up to 15 passengers. These buses will operate on a fixed route circulation similar to convention...
    Lucid Gravity gets new features with latest software update
    Lucid has released a new software update for its Gravity electric sport utility vehicle, enhancing the overall ease of use for owners. The over-the-air update, designated UX 3.3, introduces features aimed at improving the towing experience, new security functions in development, and refinements to the vehicle's infotainment system. This update allows owners to benefit from these features without needing to visit a service center, as it is delivered wirelessly. The Gravity SUV boasts a driving...
    BMW plans to commence production of its first Neue Klasse model, iX3, at its Debrecen facility in Hungary
    The BMW Group is entering the final stage before launching its first Neue Klasse model, the BMW iX3, with series production slated to start in late October at its newly established plant in Debrecen, Hungary. This facility represents the latest and most advanced addition to BMW's global production network, built under its strategic vision called the BMW iFACTORY. The plant aims for highly efficient production processes without using fossil fuels, leveraging digital advancements right from the...
    Forvia Hella launches series production of intelligent power distribution module
    Forvia Hella has commenced the series production of its intelligent Power Distribution Module (iPDM), a pioneering product ensuring a reliable and fail-operational power supply for vehicles, for a premium vehicle manufacturer. The iPDM module is designed as a key component for highly automated driving systems and incorporates electronic fuses (eFuses) for the first time in the automotive industry. Forvia Hella, with extensive experience in manufacturing electronic control units, has introduced t...
    Bridgestone Americas unveils new Alenza Prestige tire for premium CUVs, SUVs and trucks
    Bridgestone Americas has introduced the Bridgestone Alenza Prestige tire, a new premium highway tire designed for crossover utility vehicles (CUVs), sports utility vehicles and trucks. The Alenza Prestige tire incorporates Bridgestone's ENLITEN Technology, offering a refined tread pattern and enhanced wet performance. It features a limited mileage warranty of up to 70,000 miles and promises a luxurious driving experience. Components of ENLITEN Technology, such as QuietTrack Technology, ensure a ...
    IAA Mobility Show 2025: ProLogium and Rimac announce collaboration on battery platform
    ProLogium Technology and Rimac Technology have signed a memorandum of understanding (MOU) at the IAA Mobility Show 2025 in Munich to collaborate on a next-generation battery platform. This partnership focuses on integrating ProLogium's Superfluidized all-inorganic solid-state lithium ceramic battery with Rimac's expertise in scalable, high-performance battery packs for automotive applications. The collaboration aims to achieve four core objectives: Developing a Module-Free Architecture to eli...
    IAA Mobility 2025: Camel energy showcases advanced lithium-ion solutions
    Camel Energy GmbH, the European branch of Camel Group, showcased a wide range of lithium-ion (Li-ion) battery solutions at the IAA Mobility 2025 in Düsseldorf, Germany. The event highlighted the company's capabilities in providing advanced battery solutions for various sectors, including passenger cars, commercial vehicles, light mobility, low-altitude aircraft and marine applications. A key feature was the introduction of Camel Energy's lineup of large cylindrical battery cells, known for t...
    Sion Power advances anode manufacturing with proprietary vacuum deposition method
    Sion Power is advancing the anode manufacturing process by implementing a proprietary vacuum deposition method in place of the conventional mechanical rolling technique. This new process allows it to produce lithium-metal anodes with improved control, efficiency and performance, breaking past the limitations of traditional methods that restrict lithium thickness to 30-50 microns. Instead of using lubricants and additives, Sion Power's vacuum deposition deposits lithium directly onto copper fo...
    Wind River and Hyundai Mobis collaborate on Mobis Development Studio for software-defined vehicles
    In a press release on Sept. 16, Wind River, an Aptiv company, announced the completion of Mobis Development Studio, a new integrated software development environment for software-defined vehicles (SDVs) created in collaboration with Hyundai Mobis. This system merges Hyundai Mobis' cloud-based vehicle development infrastructure with Wind River Studio Developer to expedite innovation in next-generation SDVs. Mobis Development Studio is a web-based platform that offers an intuitive user interface t...
    Ram cancels battery-electric vehicle truck, plans to launch extended-range pickup truck
    Stellantis' Ram brand has decided to cancel the development of its full-size electric Ram 1500 pickup truck due to slowing demand for electric vehicles. A company spokesperson said that with decreased demand for full-size battery electric trucks in North America, Stellantis is reevaluating its product strategy and will discontinue the development of the full-size battery-electric vehicle (BEV) pickup. The launch of the truck had been delayed twice, with initial plans set for late 2024. On ...
    Orange EV and OptiGrid launch Orange Juicer DC charger for efficient fleet electrification
    Orange EV and OptiGrid have announced the launch of the Orange Juicer, a battery-integrated DC fast charger designed to revolutionize fleet electrification by overcoming significant barriers such as utility upgrades and high infrastructure costs. The Orange Juicer reduces fleet electrification timelines from years to weeks by utilizing an onboard 180-kWh battery that steadily draws energy from existing on-site power. This solution allows for high-capacity fast charging with up to 85% less gri...
    Seeing Machines adds alcohol impairment detection to driver monitoring system
    Seeing Machines has announced an enhancement to its Driver Monitoring System (DMS) technology, now capable of detecting non-drowsy driver impairment, including alcohol-related impairment. This system, already in over 3.7 million cars and 60,000 trucks, has previously focused on detecting distracted and drowsy driving. The development allows detection of alcohol impairment to the level required by European NCAP standards. In the US, DMS has mainly been used to ensure driver engagement with system...
    Continental's CrossContact RX tires approved for Cadillac Optiq and Chevrolet Equinox EV electric SUVs
    Continental has achieved original equipment approval from General Motors for its CrossContact RX tire models, which will be fitted on the Cadillac Optiq and Chevrolet Equinox EV electric sport utility vehicles. These premium electric SUVs will be equipped with all-weather touring tires, designed to provide safe, quiet and comfortable driving experiences, as well as accommodate light off-road capabilities and moderate snowfall conditions. According to Continental, its CrossContact series ...
    Aeva Technologies launches high-performance 4D lidar sensor for smart infrastructure
    Aeva Technologies Inc. recently launched a new high-performance 4D lidar sensor named Atlas Orion, designed for smart infrastructure and security applications. This sensor features a single-box design with Power over Ethernet, facilitating easier installation and reducing costs. It is capable of detecting vehicles up to 500 meters away and vulnerable road users such as pedestrians up to 200 meters, while offering a wide 120-degree field of view with high resolution for extensive intersection cov...
    IAA Mobility 2025: StarCharge showcases V2G charging products
    StarCharge, recognized for its role in electric vehicle charging infrastructure and smart energy solutions, participated in the IAA Mobility 2025 event in Munich. In collaboration with a notable automotive original equipment manufacturer, StarCharge showcased its vehicle-to-grid (V2G) products, which garnered significant attention from European visitors. This interest is anticipated to boost the expansion of StarCharge's V2G products within European markets. StarCharge, serving as a strategic...
    IAA Mobility 2025: Seres Power unveils Super Range-Extender System
    Seres Power recently launched its latest-generation Seres Super Range-Extender System, advanced engine technology and a new distributed electric drive system at the IAA Mobility 2025 in Munich. Seres Power aims to collaborate with supply chain partners to deliver safer, smarter and more convenient mobility solutions globally. The new Seres Super Range-Extender System is based on the Saiyi (C2E) Range-Extender Architecture with RoboREX Intelligent Control Technology, offering advantages in qui...
    TDK offers mechanically decoupled ultrasonic modules for collision avoidance
    According to a press release on Sept. 14, TDK has introduced the ultrasonic sensor module USSM1.0 PLUS-FS, featuring a mechanically decoupled sensor element from the housing. This design ensures that the IP65/67 protected sensor, identified with the order number B59110W2111W032, is resistant to external mechanical vibrations, which could otherwise affect measurement accuracy. The module operates on a nominal voltage of 12 V and can be installed in a front chassis using an M19 thread with a locki...
    IAA Mobility 2025: ZF unveils advanced 8HP evo transmission for hybrid vehicles
    At the IAA Mobility 2025 in Munich last week, ZF presented its updated 8HP evo automatic transmission aimed at addressing the growing demand for hybrid drives globally. The 8HP evo builds upon the successful 8-speed transmission, designed for both conventional and hybrid models. ZF's improvements focus on electrification and efficiency, resulting in a lighter and less complex transmission with fewer components than its predecessor. The enhancements include advancements in the electric mo...
    loading
    Searching our resources for you...
    preload preload preload preload preload preload